Jump to content
SAU Community

[group Buy] Acpt Carbon Fibre Tailshafts Any Model! $1400us


Recommended Posts

its the 1000ft/lbs model for a 34 GTR which works out to be 1350NM most 300/350awkw GTR's have around half this amount of torque so probably a bit overkill to go the 2000ft/lbs model unless you have a 8-9 sec drag GTR . Have weighed it on the bathroom scales at around 7kg but will weigh it on the industrial digital scales tomorrow at work and then weight the standard item on the same scales when i fit it would be interesting to get any of the 2000ft/lbs models weighed and see the difference

  • Replies 717
  • Created
  • Last Reply

Top Posters In This Topic

yeah I think the 1000ft/lb one is the go. no way you are going to put 2000ft/lb through a GTR driveline. go for the lightest one. and even better it's cheaper! though I guess this sterling advice comes a bit late for you chaps... :) glad to see you all got there in the end. :D

Hey Richo,

I got the 2000lb/ft one as its not flywheel torque. I beleive you multiply by the gearbox drive ratio to see what torque is actually applied to the shaft. 1st gear, drag launch could be quite high!!! ?

any closet neards want to expand? lol

:(

Kith Kowie's case was " I had to give them the torque my engine puts out plus the final drive and all the os giken gear ratios.

I think it worked out at about 2800 lbs so we are well under 4000 lbs" (His manufacturer is rated to 4000lbs)

yeah they were sent direct via fedex express. So you should have it within the next day or so. I can try go thru the tracking untill i find yours. That is if they are running tracking numbers. Give me a bit and i'll see.

Looks like they are random generated.. you were 10 from me in the list i sent, r32's r33's and r34's 10 numbers up from my tracking doesnt exist nor do any numbers around my tracking number so its random by the looks of things..

Can everyone let me know how we are going? who has and who hasnt i will try get some tracking numbers for guys who have not.

Cheers

Andrew

Isnt W.a another country?? hehe god damn 4 hours behind shit!!

i'm right on top of the tracking number thing! so hopefully we will have the whereabouts of them shortly.....

So no body in WA has theirs yet???

near the end.... 2:55 all about you western boys :kiss:

Edited by Angus Smart

looks like no body has received anything in WESTERN AUSTRALIA. How hard is it to put WESTERN AUSTRALIA on the damn thing

Andrew can you ask them whether they put WA or western australia on it.

Edited by 34tomidnight
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...