Jump to content
SAU Community

Recommended Posts

Hello,

Just in the process of installing a rb26dett power fc into my rb20det and i have purchased a boost control kit and it has to plug into the standard boost solenoid. After a bit of a look around the engine bay i have found this thing with JECS written on it. I looked at a non turbo rb20 and it didnt have it so its looking good so far. Am i correct, is this the solenoid im after?

Also wondering if anyone knows whether or not the rb26dett and rb20det have the same plug on the solenoid?

thanks

post-39806-1204538244_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/208787-standard-rb20-boost-solenoid/
Share on other sites

the pfc kit is meant to plug into the standard boost solenoid... has anyone with a rb20det and rb26dett pfc ever fitted the boost control kit? I havent got it yet its on its way, and computer is only half in, so i dont know which plugs come with it but im trying to sort it out befor i get it so its easy smoothe intallation

yeah but i think i might have a problem, as fc and boost control kit is designed for a rb26 it should plug into standard 26 solenoid... but i wonthave one.. hmmm

any other thoughts?

I got no idea what that thing is (isnt not present on a BNR32), I'd suggest that a metal box with only two thick wires going to it, isn't your boost solenoid :)

The boost kits comes with a solenoid, similar looking to the ones used in the AVCR and E-Boost setups; u don't use the original.

R32s don't have a boost solenoid as stated above

You should get one with the PFC boost controller kit and reroute waste-gate lines to run off the solenoid provided

That way you can wire the BC kit off that

No idea what that metal box is but when someone finds out can you tell me too please

do rb26's have a standard solenoid?? Cause the pfc bc kit is made for gtr33 same as my ecu. So it probably wont come with a solenoid if a 26 has a standard solenoid.

also that silver box, befor thinking it was a boost solenoid i think it might be a resister pack for something

Resistor pack - thats what i orig kinda thought.. but they have a lot more then 2 wires going into it, plus need boost lines as well :P

How ever much it will help, uploaded a picture from my BNR32... years ago, please don't laugh about it looking like Kosovo.

Stocko boost solenoid is to the right of the relay box, with boost lines going to it. I think R33's are the same.

med_gallery_14713_1542_144100.jpg

Edit:

do rb26's have a standard solenoid??

"Doh, posted b4 refresh'n - as above, I know R32 GTR's have em, i ignorantly, assumed all R32+ Skylines did :) ...

Regardless, outa my league but I'd say the boost solenoid comes with all PFC Boost kits... as this quote

"The high grade solenoid valve is the same one used in our Apexi Super AVC-R boost controller."

From This Link

Edited by GeeTR
This thing is a relay for the fuel pump if I'm not mistaken. It sends something like 9v to the fuel pump on idle, to minimize fuel consumption. U can tear it out. Nobody needs that.

Spot on its a resistor for the fuel pump.

yeah that silver box is for the rb20det injectors.

Na its not, maybe your getting confused with the resistor pack the GTR run, they look similar but RB20 don't use them as the injectors are high impedance anyways

This thing is a relay for the fuel pump if I'm not mistaken. It sends something like 9v to the fuel pump on idle, to minimize fuel consumption. U can tear it out. Nobody needs that.

hmm so what happens if you rip it out, 0v at idle or full 12v at idle?

While I'm here, does any PFC boost controller kit work with any PFC?

I have an AP Engineering RB20 PFC and I don't even want to thinking about looking for/finding a BC kit to suit that.. was hard enough finding the PFC it self

Eg: Would an R32 GTR BC kit work on my AP Engineering RB20 PFC?

:laugh:

Na its not, maybe your getting confused with the resistor pack the GTR run, they look similar but RB20 don't use them as the injectors are high impedance anyways

hmm so what happens if you rip it out, 0v at idle or full 12v at idle?

The car will start then stall if you have it unplugged, so i'd suggest 0 at idle. Technically you have a break in the circuit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...