Jump to content
SAU Community

Recommended Posts

Which of these pistons should I buy for my RB26DETT build?

CP Pistons, Wiseco or JE?

They are all relatively the same price (under $1,000)

In terms of the build I've just gone with ARP rod bolts, ARP main bolts, ARP head bolts, ACL main and rod bearings, etc. etc.

Nothing too too fancy.

Greg

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

The CP pistons are around $900 or so with rings + freight ($50 or so)

All up with ARP rod bolts, ARP head studs, ARP main bolts, ACL main and rod bearings I'm hoping to come in under $1,700 or so *fingers crossed*

Greg

Advice in terms of what rings to use??

I know a couple of big workshops source their own custom rings and pins to suit the CP's, but I couldn't confirm the specifics as I gave my CP's the flick and went to Tomei instead.

You have the option of using different pins and piston rings when you buy CP Pistons. They have about 5 different pin and a premium CPN ring set...

Do you have any more info on this?

I did a google search but couldn't come up with any info.

I have used CP in all my motors, no problem at all. You can get them from the US on ebay for under $700 a set delivered.

Ditto,

Ive got 8 Silvia SR20s running in the 11's on regular CP's, quite a few RB's as well.

I know a couple of big workshops source their own custom rings and pins to suit the CP's, but I couldn't confirm the specifics as I gave my CP's the flick and went to Tomei instead.

Funny that i ditched the Tomei items for the CPs.Call me crazy.

JE are the better piston out of the lot, but why pay the price for a JE when you can buy 1000hp CP's off the shelf cheaply that'll do job just as well, they're going in my next build! I wouldn't worry to much about the rings on the CP's, more so the workshop you use to put your motor together, a motor is only as good as it's builder..

This is what I've been quoted so far:

> CP Pistons, 86mm, $879.80

> ARP Head Studs $360

> Cometic Head Gasket $168.69

> ARP main studs $165

> ARP rod bolts $84.93

> ACL rod and main bearings $270

All the above prices are in USD and are excluding freight.

Freight all up is around $110USD.

This is what I've been quoted so far:

> CP Pistons, 86mm, $879.80

> ARP Head Studs $360

> Cometic Head Gasket $168.69

> ARP main studs $165

> ARP rod bolts $84.93

> ACL rod and main bearings $270

All the above prices are in USD and are excluding freight.

Freight all up is around $110USD.

For *$110* USD that sounds like the best deal i've ever heard! :laugh::down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...