Jump to content
SAU Community

Recommended Posts

There is an article in the latest HPI magazine about getting 11s in your skyline...it is claimed there that around 220rwkw or slightly more is all you need for a 11 sec pass...don't quote me on that though...but whats said in that article carries alot of truth...the rest of the car's setup is just as important...so aim for about that much power or slightly more and concentrate on other areas...and don't forget driver skill too...

Link to comment
https://www.sau.com.au/forums/topic/209779-turbo-for-time/#findComment-3713318
Share on other sites

As stated in HPI No90 10 ways to an 11 second 1/4 time R33 GTST.

Stock coil overs, stock turbo, stock injectors, rising rate fuel pressure reg, a well tuned aftermarket EMS, fmic, 3-4" free flowing exhaust split dump, 1 bar boost, 15" Drag radial tyres inflated to 20 psi, strong single plate clutch, 1/4 tank of fuel.

Also remove any excess weight from your car like spare tyre, passenger seats, etc.

Sounds like a good recipe for 220 rwkw.

To get into the 11 second mark with these mods would also need some drag racing experience i would think. As also stated in the mag.

Link to comment
https://www.sau.com.au/forums/topic/209779-turbo-for-time/#findComment-3714806
Share on other sites

Yeh the latest HPi has mainly how to get your skylines doing 11's! pretty good read. I was reading it all night. Geting slicks for your ride would be good to!!

Slicks..why bother, why would you go to a drag stip, run a 12, bolt your street rims back and only have a 13 second car all of the time. Although ' street ' rubber is a harder way of getting the times, atleast you can drive away from the drag strip after you've done a 12 second pass in a 12 second car. Don't always believe what you read in HPI too :domokun:

Link to comment
https://www.sau.com.au/forums/topic/209779-turbo-for-time/#findComment-3714821
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...