Jump to content
SAU Community

Recommended Posts

G`Day all,i have had some seat`s for a while now just had to get them sorted out,which i have now done.so it`s to easy to do undo 4 bolt`s,sorry % bolt`s as you will need to change seatbelt anchore,this has different connector,unbolt your one bolt it on other seat,just the job,You do sit somuch lowe in the car ,as brad & mark found out on sunday`s cruise.so hear`s some photo`s i have taken ,Hope this help`s someone out.cheer`s chuckie.post-36964-1205149806_thumb.jpgpost-36964-1205149164_thumb.jpg post-36964-1205149201_thumb.jpgpost-36964-1205149233_thumb.jpgpost-36964-1205149275_thumb.jpgpost-36964-1205149892_thumb.jpgpost-36964-1205149318_thumb.jpgpost-36964-1205149294_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/209821-r32-gtst-seats-in-to-stagea/
Share on other sites

they are definately worthwhile on anyone into abit of spirited driving/trackwork, i found u actually sit IN the seat rather than ON it like the stagea bench seats haha.

I'm looking at going for a pair of r34 gtr east bear seats from C-Red for $1200 for the pair brand new. Heres the link if anyone else is keen, i think they are a bargain and look good.

http://www.c-red.com.au/newparts/eastbear/seats.shtml

One thing i will say is that if you LIKE to see the front of your car ??? then think again you sit some 70mm lower so if your a short ass you have no hope ???,iam 175cm & my shoulder`s are level with window,post-36964-1205227919_thumb.jpgas you can see i sit low in the car,GOOD LUCK.cheer`s chuckie

Edited by chuckie
they are definately worthwhile on anyone into abit of spirited driving/trackwork, i found u actually sit IN the seat rather than ON it like the stagea bench seats haha.

I'm looking at going for a pair of r34 gtr east bear seats from C-Red for $1200 for the pair brand new. Heres the link if anyone else is keen, i think they are a bargain and look good.

http://www.c-red.com.au/newparts/eastbear/seats.shtml

I like them. So they will sit you lower and further back than the standard seats? get enough carpet and do the rears and door inserts to match :D

shopping list once my 1600 sells- turbo, zorst, seats lol.

Chuckie: What are your front/rear heights? and how far off are those new dash matts :thumbsup:

Edited by Ryan1600
One thing i will say is that if you LIKE to see the front of your car ??? then think again you sit some 70mm lower so if your a short ass you have no hope ???,iam 175cm & my shoulder`s are level with window,post-36964-1205227919_thumb.jpgas you can see i sit low in the car,GOOD LUCK.cheer`s chuckie

haha, u know i am a short arse so i will sit lower as well, but im soo used to it in the daily driver (mistubishi gto) so its not a big deal as long as i can see the road :thumbsup:

I'm looking at going for a pair of r34 gtr east bear seats from C-Red for $1200 for the pair brand new. Heres the link if anyone else is keen, i think they are a bargain and look good.

Brad, if you get these East Bear seats you will still need to get rails.

I have a spare set of Bride rails for sale. Shameless plug.

Chuckie, do the 32 seats have the adjustments for the front and back of the base too, just like the Stagea ones?

Not that I use them, mine are at full low at the back, and veeeery slightly lifted at the front for under-thigh support, but it's always good to have options if someone else needs to drive your car and get comfortable.

Chuckie, do the 32 seats have the adjustments for the front and back of the base too, just like the Stagea ones?

Not that I use them, mine are at full low at the back, and veeeery slightly lifted at the front for under-thigh support, but it's always good to have options if someone else needs to drive your car and get comfortable.

YES they have 3 adjustment`s 2 on bottom & 1 on top,the one in top bit of seat bring wing`s in & out so they will squeeze you or grip no lumber support ,it`s a nobb that take the side`s in or out ,good setup,if you look at photo`s of back of seat`s you can see the nobb that adjust`s them driver`s seat only,cheer`s chuckie
YES they have 3 adjustment`s 2 on bottom & 1 on top,the one in top bit of seat bring wing`s in & out so they will squeeze you or grip no lumber support ,it`s a nobb that take the side`s in or out ,good setup,if you look at photo`s of back of seat`s you can see the nobb that adjust`s them driver`s seat only,cheer`s chuckie

Awesome - even better than the Stagea seats then. I wish the wings on the Stagea seats were adjustable, or at least a bit deeper so they'd hold you in the seat more when cornering.

any seats and rail from 32/33/34 will fit ok so there are plenty of options. But I just can't bring myself to put sporty seats in, its not that kind of car (its more your electric leather seat kind of car)

any seats and rail from 32/33/34 will fit ok so there are plenty of options. But I just can't bring myself to put sporty seats in, its not that kind of car (its more your electric leather seat kind of car)
Duncan It`s Nice to sit in a seat that has some sort of shape & huge`s you ?,I suffer with a back problem so to sit in the car with a seat that is not that NICE to sit in,so this is a GREAT deal better than the Factory seat,I will be looking at some better seat`s some time but i think that you NOW feel apart of the CAR ,IF you like to SLIDE AROUND in your LEATHER SEAT`S then BEST OF LUCK,

cheer`s chuckie.

But I just can't bring myself to put sporty seats in, its not that kind of car (its more your electric leather seat kind of car)

I was proud of of electric leather type seat car today. It managed to take the smile of a near new porsche 911 drivers face today.

But mine does have sports seats :domokun:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...