Jump to content
SAU Community

Garrett 2860

donkey

By donkey,
in Engines & Forced Induction

 Share

Recommended Posts

donkey Community Regular

donkey

Posted
  • Author
Posted

my mechanic went to fit them up and they didnt fit, had to make custom dump pipes, apparently the turbo flange? was the problem, he is one the top tuners in nz.....so im hoping he was right! plus had to make up new oil, water returns from the turbos, can find exactly what is the problem if you want......

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3714355
Share on other sites
gotRICE? Veteran

gotRICE?

Posted
Posted
my mechanic went to fit them up and they didnt fit, had to make custom dump pipes, apparently the turbo flange? was the problem, he is one the top tuners in nz.....so im hoping he was right! plus had to make up new oil, water returns from the turbos, can find exactly what is the problem if you want......

May have been wise to do before posting :pirate:

Your not talking about Soichi are you? If so. Dis-regard my comment.

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3714391
Share on other sites
donkey Community Regular

donkey

Posted
  • Author
Posted
May have been wise to do before posting :pirate:

Your not talking about Soichi are you? If so. Dis-regard my comment.

no, christchurch company, but i trust these guys wouldnt get it wrong, they would have the most cars featured in nz performance over any other workshop, dam switched on........

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3714570
Share on other sites
Fumes21 Contributor

Fumes21

Posted
Posted
Mine are here in a week (or two) and id imagine wont have any issues like any other grand name dump.

But then im using GT-SS, but same turbo essentially, people using them on 2530's = same as -5

I thought you posted earlier that your using trust dumps as there the best?Was I mistaken :D

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3715554
Share on other sites
donkey Community Regular

donkey

Posted
  • Author
Posted
May have been wise to do before posting :)

Your not talking about Soichi are you? If so. Dis-regard my comment.

spoke to one of the mechanics. he said they will not bolt up to the turbos, no way of fitting......tomei dump pipes forsale :D ha....

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3720275
Share on other sites
Cooper Proficient

Cooper

Posted
Posted

I sure as hell hope they bolt up to the Gt2860R-7's because i have Tomei dumps sitting at home waiting for my turbos which were ordered about an hour ago.

I will be very pissed if they dont fit, my cars been off the road too long for me to get other dumps to fit my front pipes.

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3720425
Share on other sites
rb26s13 Mentor

rb26s13

Posted
Posted
Mine are here in a week (or two) and id imagine wont have any issues like any other grand name dump.

But then im using GT-SS, but same turbo essentially, people using them on 2530's = same as -5

how much for the old trust ones?

the reason why ur dump pipe doesnt fit ur new turbo is because u bought the wrong exhaust housing

the exhaust housing u have must be to suit a SR20 dump pipe

an eazy fix for this problem is get ur standard Rb turbo's exhaust housing machined to suit ur new 2860

exactly wat i was goin to point out

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3738349
Share on other sites
  • 1 year later...
Angus Smart Grand Master

Angus Smart

Posted
Posted (edited)

I think you need to tell that kiwi boy of yours to lay off the crack..

they fit..

post-31456-1239777460_thumb.jpg

Shit.. just read the rest of the thread..

i'm sure one of the dumps has an indent to overcome that problem of fouling..

either way i wont ever know since i have a/m turbo inlets anyway......

i've gone from Trust to tomei... trust is pain in the burrrtt

Edited by Angus Smart
Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-4535189
Share on other sites
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...