Jump to content
SAU Community

Garrett 2860

donkey

By donkey,
in Engines & Forced Induction

 Share

Recommended Posts

donkey Community Regular

donkey

Posted
  • Author
Posted

my mechanic went to fit them up and they didnt fit, had to make custom dump pipes, apparently the turbo flange? was the problem, he is one the top tuners in nz.....so im hoping he was right! plus had to make up new oil, water returns from the turbos, can find exactly what is the problem if you want......

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3714355
Share on other sites
gotRICE? Veteran

gotRICE?

Posted
Posted
my mechanic went to fit them up and they didnt fit, had to make custom dump pipes, apparently the turbo flange? was the problem, he is one the top tuners in nz.....so im hoping he was right! plus had to make up new oil, water returns from the turbos, can find exactly what is the problem if you want......

May have been wise to do before posting :pirate:

Your not talking about Soichi are you? If so. Dis-regard my comment.

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3714391
Share on other sites
donkey Community Regular

donkey

Posted
  • Author
Posted
May have been wise to do before posting :pirate:

Your not talking about Soichi are you? If so. Dis-regard my comment.

no, christchurch company, but i trust these guys wouldnt get it wrong, they would have the most cars featured in nz performance over any other workshop, dam switched on........

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3714570
Share on other sites
Fumes21 Contributor

Fumes21

Posted
Posted
Mine are here in a week (or two) and id imagine wont have any issues like any other grand name dump.

But then im using GT-SS, but same turbo essentially, people using them on 2530's = same as -5

I thought you posted earlier that your using trust dumps as there the best?Was I mistaken :D

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3715554
Share on other sites
donkey Community Regular

donkey

Posted
  • Author
Posted
May have been wise to do before posting :)

Your not talking about Soichi are you? If so. Dis-regard my comment.

spoke to one of the mechanics. he said they will not bolt up to the turbos, no way of fitting......tomei dump pipes forsale :D ha....

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3720275
Share on other sites
Cooper Proficient

Cooper

Posted
Posted

I sure as hell hope they bolt up to the Gt2860R-7's because i have Tomei dumps sitting at home waiting for my turbos which were ordered about an hour ago.

I will be very pissed if they dont fit, my cars been off the road too long for me to get other dumps to fit my front pipes.

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3720425
Share on other sites
rb26s13 Mentor

rb26s13

Posted
Posted
Mine are here in a week (or two) and id imagine wont have any issues like any other grand name dump.

But then im using GT-SS, but same turbo essentially, people using them on 2530's = same as -5

how much for the old trust ones?

the reason why ur dump pipe doesnt fit ur new turbo is because u bought the wrong exhaust housing

the exhaust housing u have must be to suit a SR20 dump pipe

an eazy fix for this problem is get ur standard Rb turbo's exhaust housing machined to suit ur new 2860

exactly wat i was goin to point out

Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-3738349
Share on other sites
  • 1 year later...
Angus Smart Grand Master

Angus Smart

Posted
Posted (edited)

I think you need to tell that kiwi boy of yours to lay off the crack..

they fit..

post-31456-1239777460_thumb.jpg

Shit.. just read the rest of the thread..

i'm sure one of the dumps has an indent to overcome that problem of fouling..

either way i wont ever know since i have a/m turbo inlets anyway......

i've gone from Trust to tomei... trust is pain in the burrrtt

Edited by Angus Smart
Link to comment
https://www.sau.com.au/forums/topic/210071-garrett-2860/#findComment-4535189
Share on other sites
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • djr81
      RB26DETT Sketchy boost mod?

      By djr81 · Posted

      Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
×
×
  • Create New...