Jump to content
SAU Community

Garrett Gt2860r -5, Gt2860r -7, Gt3071r Turbos


Recommended Posts

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

I am tossing up between the gt3071r and a GCG highflow. My question is as i can not find it elsewhere what is needed to bolt the gt3071r to an rb25, is it just modified oil and water lines or the whole hog meaning custom dump pipe and intake side as well.

Yes you need new oil and water lines, dump pipe, other bits n pieces and plus mainfold if you wanna go for a high mount.

Hey sloutch i mite be interested in the 3071rs, whats the lastest date for a deposit.

cheers

Yes you need new oil and water lines, dump pipe, other bits n pieces and plus mainfold if you wanna go for a high mount.

Hey sloutch i mite be interested in the 3071rs, whats the lastest date for a deposit.

cheers

There won't be a deposit. A direct payment will be set up between the supplier and the buyer.

As i said before, i am not earning any form of money through this deal. I am merely helping out fellow SAU mates to get the best price for their turbos.

also more info on the 3071r, IW or external? what rear housing etc

We can supply you with the internal wastegate or external waste gate version. Which ever one you want. Same as the rear housing.

Unfortunately, i don't think it comes with the actuator. Need to double check with the supplier.

For information please go to Garrett website.

http://www.turbobygarrett.com/turbobygarre...bochargers.html

You've got a PM :)

Is there any way to avoid GST and taxes etc? I imagine if we get "caught", it'll be no cheaper than buying them from AUS? Unless I'm missing something (most likely :P )

Tommo you buying a pair for the bike mate?

lol

:D

sloutch- Im really interested in a 3071r internal wastegated, .82 a/r, ill let you know towards the closing date

;)

just to re-clarify that is $1500 for a 3071r EXTERNAL GATE, t3 4-BOLT REAR EXHAUST HOUSING in the 0.63 REAR.

only reason i am asking agian is, few people have misquoted this turbo for the internal gated, t2x flange,

and been re-quoted over $2000.

thanks,

just to re-clarify that is $1500 for a 3071r EXTERNAL GATE, t3 4-BOLT REAR EXHAUST HOUSING in the 0.63 REAR.

only reason i am asking agian is, few people have misquoted this turbo for the internal gated, t2x flange,

and been re-quoted over $2000.

thanks,

Yes it is $1,500 for T3 flange please read the post i replied. It was stated clearly.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
    • Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
×
×
  • Create New...