Jump to content
SAU Community

Recommended Posts

Bloody hell!! im getting me a 3076!!!

Is it possible that the boost dropping off is because the turbo is starting to run outta puff?

Yeh we think the .82 is at its limit, this turbo is only meant to produce 525 engine horsepower lol

More likey exhaust gas pressure in the turbine housing. Unfortunately, turbine sizing is a trade off between response/spool and hp.

PJ is running this turbo on an SR and it is holding 25psi at 7400rpm - but he runs a T25/T28 HKS 1.12 ex housing vs NYTSKY's T3 Garrett .82.

I've no doubt there's still more in NYTSKY's setup if boost could be held - you can see the torque curve closely mimics the boost curve. If you can hold boost, torque will pull up and therefore hp at a given rpm. However, this maybe all that can be practically pushed through the .82 ex housing.

In any case its an awesome setup for a street car and no doubt more than a handfull for most of us. :thumbsup:

As soon as PJ put on the bigger housing the increase in HP was about 25rwkw from memory,

sweet. :) that is good power mate. it will be a big handful to punish now. :yes:

Thanks Richard! Taking the car to Skids on Sunday, so we will see how much of a handful it will be :)

Yeah its hard to say at this stage, he might just be pushing all the thing is keen to all around. I have seen higher numbers from them, but from more aggressive engine/boost/fuel setups and its hard to tell how dynos compare. 363rwkw on a Mainline is fair roaring it out, I'd expect this thing to be one of the more brutal "all around" RB25 setups anywhere.

Thanks for the comment! It will be and "all rounder" when i get this box sorted out.

Very nice Dave, very nice indeed!

Cheers mate :thumbsup:

Took the car out to stretch its legs.

All i can say is i need bigger brakes lol

Very punchy down low and just builds huge power all the way through.

But the rear end feels like its floating around under load. Ill need to get that looked at.

aftermarket diff? best thing I ever did to improve rear end feel in the GTSt

nice power curve BTW... I've got the same top end power in the R but yours is coming on way earlier and more linear... a good 500rpm earlier... gotta love the RB25 VCT... I'm assuming its is still standard capacity?

that E85 look like good stuff, wish we could get it reliably down here:(

it's about a 40 min drive from my work, 60 or so from home... If there was a closer one, I probably would have gone E85 by now...

I doubt i will for a while now that my tuner has farked awf to Georgie... :D lol

I really hope there are more in the next 12 months or so. I don't want this to go the some route as V Power Racing...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
×
×
  • Create New...