Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Unless I just got majorly ripped off.. Car is at the tuners as we speak.. I was told they were "glued in" and "unable to tune" I thought I'd take it to the closest place to me and they said they've done them before and even getting tuned to 98ron "tuned to the whatever fuel is in the tank" he said

Well my r32 is in the shop getting worked on.. I was also told mines ecu's are useless because of the proxy's being glued in? Mine however was not. Are they still an alright ecu if they are tuned properly?

IFF they are able to alter timing and afrs it will be fine.

AFAIK (z32 circles), mines ecu's are just chipped OEM ecu's. These cannot be 'tuned' as such.

Sometimes the chip can be removed and a new chip burnt and installed in the empty socket. It is still an OEM ecu however, with a socket that can accomodate a tuned chip.

Sometimes the chip is glued in solid.

AFAIK (z32 circles), mines ecu's are just chipped OEM ecu's. These cannot be 'tuned' as such.

Sometimes the chip can be removed and a new chip burnt and installed in the empty socket. It is still an OEM ecu however, with a socket that can accomodate a tuned chip.

Sometimes the chip is glued in solid.

Okay, I'm confused now.. So when this guy says he can tune it, is he lying? :/

Also what would this cost around? (I do have a quote but in my opinion it seems a bit steep)

Mines ECU cannot be tuned. they can possibly re chip it to their tune but you will likely be locked into that tuner. I got a quote to re chip my ECU for lulz and it was $1200 to re chip and flash it with a tune. Just go out and find a second hand PFC for like $400-500 (shop around you will find one) and get it tuned properly. Ill pick my GTR up today. ECU+tune cost me $1000...and that will allow you to get it tuned pretty much anywhere.

Edited by Anfanee

Okay, I'm confused now.. So when this guy says he can tune it, is he lying? :/

Also what would this cost around? (I do have a quote but in my opinion it seems a bit steep)

Probably are lying, unless by "tune" they mean nothing more than twisting the CAS back and forth.

As has been said....Mines did no manufacture ECUs. A Mines ECU is a Nissan ECU with Mines tune dropped onto an EEPROM. You can put any other EEPROM (with same model tune of course) in there and it will run the engine. You could probably convert it to Nistune. But you cannot do anything to tune the Mines ECU whilst the Mines EEPROM is sitting in the socket.

Well I've just been told to take my car out of there workshop.. They've already started working on the car, so I'm spewing, I was quoted $1600 all up........

Sorry to hear that. They where talking up your ass. may i suggest for tunes take it to a well known place. For example CRD or w/e depending on location. Tunes are VERY important to a car and in the wrong hands it can be quite costly. A good workshop will tell you if it's not worth doing something because they understand that word of mouth travels far. If you get a good experience you are likely to send business their way.

Keep an eye out on import moster/ebay/forums here for a PFC and you will find one cheap!

Sorry to hear that. They where talking up your ass. may i suggest for tunes take it to a well known place. For example CRD or w/e depending on location. Tunes are VERY important to a car and in the wrong hands it can be quite costly. A good workshop will tell you if it's not worth doing something because they understand that word of mouth travels far. If you get a good experience you are likely to send business their way.

Keep an eye out on import moster/ebay/forums here for a PFC and you will find one cheap!

Okay, found out one of my mates dads are good friends with the owner. So might have a chat to him and see what's up.. But I'll keep my eye out for PFC

There are ways of tuning your car.

Pull your ecu.

Remove 'chip'

Install ecu with nistune into your car (shop ecu)

Tune.

Burn new tune onto new chip.

Install chip with new tune into your ecu in place of mines chip.

Reinstall your ecu back into your car.

^^^^ And i bet they would have done none of that

You've been no help..

Anyway.. All sorted I spoke to someone who knows a bit, got some price cut off but supposably it IS tuneable (well he said he can and will flash tune) and also is going to check base timing which might need to be altered.. So I'm a little less worried now..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...