Jump to content
SAU Community

Recommended Posts

Was at Krispy Kreams in Narre warran on friday night and saw plenty of skylines, specifically 2 white r34 gtt's at maccas and later following eachother; one with a URAS bodykit and one pretty stock.

I was in the little cruise group with the 180sx and my 34gtr.

Spotted SKYL1N cruisin down maroondah highway, crossing station street in Box Hill. I was turning right onto station.

remember that. was getting a park to get sensation ticket from Ticketmaster.

Spotted CAJFLY parked in a street just near anaconda milk bar in narre.

My mate lives just around the corner from there :banana:

yeh thats my house where i was park outside. next time if ya wont give a toot and i will come out and say hi. i saw u drive pass as goin back towards annaconda . i was like mmmmmmmm 34 hehehe

yeh thats my house where i was park outside. next time if ya wont give a toot and i will come out and say hi. i saw u drive pass as goin back towards annaconda . i was like mmmmmmmm 34 hehehe

I sure will =]

Im suprised i've never seen you there before, im at my mates all the time haha.

I think i may have seen you a week or two back as well driving past me and into the street, but it was too dark to tell lol.

Was at Krispy Kreams in Narre warran on friday night and saw plenty of skylines, specifically 2 white r34 gtt's at maccas and later following eachother; one with a URAS bodykit and one pretty stock.

I was in the little cruise group with the 180sx and my 34gtr.

were you in a black R34 GTR??? i was in a white R34 GTT. i was pretty much drooling over your car lol. soooooooooooo hot

been seeing your old 34 just about every night, wouldnt say shes being treated all the best, YOUR CAR IS NOW A TAYLORS LAKES MACCAS JUNKIE!!

apparently he has myspace :blush:

http://profile.myspace.com/index.cfm?fusea...iendID=29247904

on Christmas day spotted a nice clean stock looking silver 32, original wheels and all, except big front mount went very well.

on greens rd towards keysboughr.

Edited by mastadd
were you in a black R34 GTR??? i was in a white R34 GTT. i was pretty much drooling over your car lol. soooooooooooo hot

lolz that was me! i was checking your car out when you drove in.....very nice!

Was it you making the dose noise?

lolz that was me! i was checking your car out when you drove in.....very nice!

Was it you making the dose noise?

lol nah man. my car dosnt dose lol. i only get turbo flutter on full boost but no sick dose lol

love your car man

Just spotted like 3min's ago, 34 GTR!!! now normally no big deal, but this was a 34 GtR NUR!!! i haven't seen one on the roads here! driving down little Collins st, i stood with my jaw on the floor and the skinny white guy bhind the wheel wouldn't even give me a thumbs up 2 my thumbs up! still pimp'n car tho, had Led tail lights also

lol nah man. my car dosnt dose lol. i only get turbo flutter on full boost but no sick dose lol

love your car man

Thanks man, someone in the crowd was making dose sounds with their mouth lolz!

Come say hi if you see me there again, its da boyz fav cruise spot.

spotted Paul today in mornington. i was working he was cruising :D ( sorry for the late indicating, i was to busy looking at your car :D )

hey - yeah we were heading down to portsea for the day, traffic was psycho in rosebud so we stayed there

spotted a r33 at bp on springvale and wellington rd's about 5:30pm gave the thumbs up would have stopped but was running late for a call out. think it had personal plates. also spotted a white 33 about 6pm on springvale rd gave a :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...