Jump to content
SAU Community

Recommended Posts

Take it down to a data recovery company immediately... $270 is a reasonable price for the work involved. Do not try recovery software or touch the drive.. you could be making subsequent recovery more difficult if you try. If your documents mean anything to you, get an expert to look at it.

I know of a few places in Adelaide that do recovery, just pm me if you want more info.

Take it down to a data recovery company immediately... $270 is a reasonable price for the work involved. Do not try recovery software or touch the drive.. you could be making subsequent recovery more difficult if you try. If your documents mean anything to you, get an expert to look at it.

I know of a few places in Adelaide that do recovery, just pm me if you want more info.

$270 is a shit price for a piece of hardware that still works, it just wiped the header files... the HDD isn't broken...

If it's a bad header.. that's a crap price... if it's a crashed hardie then i've seen worse prices than $270. But seriously, if the data is that important, e.g. you have your 4 years thesis on it or something without a backup, then it's not much to pay.

Me? Nope. I work with pretty critical data though, defence / health records etc... if it's a screwed ntfs header we just fix that using a hex editor, if the drive sounds like it's crashed, we usually send it to the experts. If we try formatting it, or reading off the crash drive, it could make things a lot more difficult to recover for the data specialists, so we tend to leave it alone.

The reason that the pro data recovery cost so much money is that they dismantle the hard drive, buy a new hard drive exactly the same, and then transplant the platter into the new drive to read the data. This needs to be done in an absolutely clean environment too. Most of the bigger data recovery places have a full on anti-dust clean room. This all costs money! :O

Did you get it fixeded up yet?

'

doof, your not on my msn cos you don't put out! pm'ed ya.

No.. Some genius switched the details over on the phone and internet company.. = no internet for me..

Take it down to a data recovery company immediately... $270 is a reasonable price for the work involved. Do not try recovery software or touch the drive.. you could be making subsequent recovery more difficult if you try. If your documents mean anything to you, get an expert to look at it.

I know of a few places in Adelaide that do recovery, just pm me if you want more info.

Dude.. You are posting in the NSW forums.. You have to be kidding right..

$270 is a shit price for a piece of hardware that still works, it just wiped the header files... the HDD isn't broken...

Agreed.. I'm not paying

The reason that the pro data recovery cost so much money is that they dismantle the hard drive, buy a new hard drive exactly the same, and then transplant the platter into the new drive to read the data. This needs to be done in an absolutely clean environment too. Most of the bigger data recovery places have a full on anti-dust clean room. This all costs money! :)

Correct.. I'm very sterile too! :O

The reason that the pro data recovery cost so much money is that they dismantle the hard drive, buy a new hard drive exactly the same, and then transplant the platter into the new drive to read the data. This needs to be done in an absolutely clean environment too. Most of the bigger data recovery places have a full on anti-dust clean room. This all costs money! :)

zackly :ermm: I went to a really good one of those once... was static and dust free and the workers had to wear air tight suits :O Their prices for what they charged were astronomical too! I got a quote to just change the motor on the HDD and it was over $500... Me thinks they work mostly for businesses, not little people like me...

Either way Dif, if you turned it on to find there was nothing there, that means the hardware is fine and you are only missing the header files... a software program will be able to sort that out and get most, if not all, of your files back :huh:

zackly ;) I went to a really good one of those once... was static and dust free and the workers had to wear air tight suits :P Their prices for what they charged were astronomical too! I got a quote to just change the motor on the HDD and it was over $500... Me thinks they work mostly for businesses, not little people like me...

Either way Dif, if you turned it on to find there was nothing there, that means the hardware is fine and you are only missing the header files... a software program will be able to sort that out and get most, if not all, of your files back :)

Yep It all works.. Just need to recover shit..

I'm pissed that our net is down.. and some f**k stole my memory stick so I cant download any programs.. GRRR..

The reason that the pro data recovery cost so much money is that they dismantle the hard drive, buy a new hard drive exactly the same, and then transplant the platter into the new drive to read the data. This needs to be done in an absolutely clean environment too. Most of the bigger data recovery places have a full on anti-dust clean room. This all costs money! :P

Yep Primordial's right... has to be a hermetically sealed area. Oh well, if your data is priceless then that'd be your best bet.

Dude.. You are posting in the NSW forums.. You have to be kidding right..

Easy there son, just trying to help a brother out here.

Yep Primordial's right... has to be a hermetically sealed area. Oh well, if your data is priceless then that'd be your best bet.

Easy there son, just trying to help a brother out here.

I know but why would I send it to Adelaide..

It's not hardware problems it's software problems..

I'm not going to pay someone $270 to recover data when I can either do it myself or have people I know do it even cheaper.

I'm not going to pay someone $270 to recover data when I can either do it myself or have people I know do it even cheaper.

If you don't do everything perfect, you might be in a worse situation than you are now.

I can see exactly where Howie is coming from - if the data is *that* criticial to you, don't play around trying to get it back with a free application. If it's stuff you can afford to lose if you totally stuff up, then go for gold :P

Edited by TommO
I know but why would I send it to Adelaide..

It's not hardware problems it's software problems..

I'm not going to pay someone $270 to recover data when I can either do it myself or have people I know do it even cheaper.

You're assuming it's not hardware... the reason I suggested Adelaide, was because I use a group who deal primarily with restoring data for the DoD and the higher education sector.. i've used them plenty of times and I trust them. They aren't backyarders, the owner holds a doctorate in computer systems engineering.

If you don't do everything perfect, you might be in a worse situation than you are now.

I can see exactly where Howie is coming from - if the data is *that* criticial to you, don't play around trying to get it back with a free application. If it's stuff you can afford to lose if you totally stuff up, then go for gold :P

Exactly... if the data isn't *that* critical, then go your hardest... even try swapping the platter over to a replacement hard drive if you want.

If it is software, then you're laughing then aren't you ;)

pretty certain it's software, being that it turns on and shit...

IF it somehow turns out to be hardware, then yes, it will cost a lot of money, and you should leave it to the pros... BUT IT'S NOT! FOCUS PEOPLE!

I've used data recovery services twice in the last 15 years and am very happy.

If the data is important why would you bollocks around with it and possibly change it from simple to recover to impossible to recover.

On the other hand, if you can afford to lose it, go for it!

How'd you go Corrinne? Shouldn't be too hard to recover..

They're just going to do the same thing.. Deleted files only become hard to recover when you overwrite them and the pointers in the MFT/FAT/WHATEVER get changed.. Anyways, really depends on how much you value what's on there!

in the meantime - my 320G drive has suffered mechanical failure - quote from Seagate to restore it - $900-$1700 - price of my gearbox repairs.. yet to work out what i'll do.. Anyone got someone to recommend

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...