Jump to content
SAU Community

Recommended Posts

hey guys,

have anyone done this b4?

i want to remove the rear wiper for the 34.

how do u remove it and also seal it?

if there is a thread on this kindly post it here!

many thanks!

ps: did a search " removing rear wiper, rear wipers, wipers etc" no luck

Link to comment
https://www.sau.com.au/forums/topic/212486-removing-rear-wipers/
Share on other sites

I'm not sure about the 34, but on the 33 the wiper assembly came up through the glass. When you remove it, it'll leave a large hole in the glass which you cant patch up without making it look stupid, which ruins the look that you were going for in the first place. You can get a sheet of glass custom made, but it will cost WAY too much and isnt really worth it. Just get used to it, they are surprisingly useful. There was something about it in the General Maintanence forum, have a look in there a few pages in.

You just remove it from inside your boot up on the parcel shelf. Just a couple of 10mm bolts on the inside, and a 10mm bolt on the wiper arm itself.

On my R33 i just covered the whole using a rubber gromet i got from clark rubber, which sealed it perfectly and actually looks quite good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, long time no post as per usual! It's been a busy year so far, the biggest thing being a new job.  After 28 years in the automotive industry I decided it was time for a change.  I was losing faith in the industry and where it's heading.  Now in a completely different industry (electrical) working for a company that manufacture water pump contollers.  Not as sexy as cars but it's an interesting,  challenging industry. I now don't work Saturdays which is a bonus!  It's still 50-55 hours a week but having Saturdays ack after 28 years of working them is awesome!   No news on the GT-R but i did decide to add some more JDM goodness into my life....           1990 300 ZX.  She's not perfect but for a 35 year old car she ain't bad!  Just going to tidy it up a bit and enjoy it.  It's currently auto but will start stockpiling everything for a manual swap. It WILL distract me even further from the GT-R but im hoping not for too long! It somewhat proves a 6'8" freak can fit in a 300 ZX.  Sort of...  I drove it home from the previous owners house in Melbourne via Black Spur and Merton Gap (2 awesome bits of Victorian twisty road) and it was amazing!  Handles so well!!!   I don't think it would be worthy of a full build page but I'll post up some of the upgrades here if anyone is interested?  Cheers guys!
    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
    • A few random issues have popped up since my last update. My WMI pressure sensor failed within about 10 minutes of it seeing liquid. It was a 20$ China special, so I'm not surprised. My name brand replacement should arrive today.  My power steering assist also decided to crap out last weekend. The usual, works for about 60 seconds after starting the car then I lose it. I dusted off my old copy of NDS and connected to the HICAS ECU. Code 4 for assist solenoid.... I tested the solenoid and it's fine.  I knew the day where my HICAS ecu would crap out would come, and I welcome it. It was the last HICAS part on the car that is now in the bin. I've ordered an SSR and I will control the power steering solenoid with my Haltech ecu. It will be nice to have proper speed referenced assist again after all these years.   
×
×
  • Create New...