Jump to content
SAU Community

Crank Strength And Upgrading Options.

LedZepLen

By LedZepLen,
in Engines & Forced Induction

 Share

Recommended Posts

Gerg_R31 Mentor

Gerg_R31

Posted
Posted

what would you charge for the rb30 stroker crank and rods?

you mentioned making forgies with it, but me and i notced a few others have gone the N/A path so just wondering if you were making non forged pistons to suit?

are you going to make these reguarly or made to order or just the 1 off batch?

  • Replies 213
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

nismomiles33
nismomiles33

I used a grub screwed, machined and balanced, nitrated standard crankshaft (Nizpro spec??) .. should hold up with most, I was told that should be good for 800+HP.

Posted Images

Gerg_R31 Mentor

Gerg_R31

Posted
Posted

any reason to why your not making this kit with a non forged piston? (not everyone wants to go the forced induction path)

can the kit be bought without the pistons?

whats the height difference between the normal rb30 piston and the piston for the 3.3?

i've been told there are pistons that have a shorter skirt that will suit the rb30de im building, cant remember the part number but what are the chances of them suiting?

do you balance the cranks?

will the 3.3 crank have knife edging or standard counter weights?

Spoolup Mentor

Spoolup

Posted
Posted (edited)

Shaun O - around the $6500 - 7000 mark with the AUS dollar at its current rate. It should see 7500 - 8000 plus rpm depending on setup.

Gerg R31 - The reason is that you are the only person who has mentioned it, so Im presuming demand is minimal especially due to the price involved. The other reason is that no one readily and easily makes cast pistons in short runs or one offs. I could easily make you a forged piston for an NA set up though. You would just have to spec the comp ratio you require. The length of the skirt has nothing to do with the comp ratio.

Edited by Spoolup
Gerg_R31 Mentor

Gerg_R31

Posted
Posted (edited)

i just thought you may have designed pistons that were shorter to suit the stroker kit, if the over all height of the pistons dont change i might still be able to get the ones i had in mind, though i know forgies handle heat better

im aiming at around 10.5:1 to 11:1 comp ratio so if you made me a piston the rb25de piston dome with valve releif would be fine with me

plus i work at a machine shop so decking and other machine work and balancing etc is easily done

are you making the kit pistons dome with valve releif? flat top? or dish?

(i know alot of questions but more info may also bring more interest)

Edited by Gerg_R31
Dynamix Experienced

Dynamix

Posted
Posted
im sure that would be ok due to the lower rev range of the 30.

Well the rb26 in thier Z drag car is seeing 10,000 rpm with the tomei pump so i would think rob has something sorted...

Spool, so you 3.4L kits will rev to 7500-8000rpm?

Spoolup Mentor

Spoolup

Posted
Posted

We will have to wait and see - but similar setups with the 3.4L 2JZ ( near identical bore stroke ratio ) have gone 8000 plus easily enough

Well the rb26 in thier Z drag car is seeing 10,000 rpm with the tomei pump so i would think rob has something sorted...

Spool, so you 3.4L kits will rev to 7500-8000rpm?

R.I.P.S NZ Collaborator

R.I.P.S NZ

Posted
Posted (edited)
Well the rb26 in thier Z drag car is seeing 10,000 rpm with the tomei pump so i would think rob has something sorted...

I have never had a RB26 in the 240z, its always been a RB30, stock block, stock crank, RIPS wet sump etc and anyone who says a stock 30 crank won't rev hard or is limited to 7500 etc is talking rubbish

http://nz.youtube.com/watch?v=nHLfRseF_F4

http://nz.youtube.com/watch?v=G6qtA0_kQUc

9500-10,000 rpm during burnout

Rob

Edited by R.I.P.S NZ
Dynamix Experienced

Dynamix

Posted
Posted
I have never had a RB26 in the 240z, its always been a RB30, stock block, stock crank, RIPS wet sump etc and anyone who says a stock 30 crank won't rev hard or is limited to 7500 etc is talking rubbish

http://nz.youtube.com/watch?v=nHLfRseF_F4

http://nz.youtube.com/watch?v=G6qtA0_kQUc

9500-10,000 rpm during burnout

Rob

Bah you know i mean't. :P

Dynamix Experienced

Dynamix

Posted
Posted
Lol, clam down, its all good :) I was just correcting your 26 comment, nothing else in my post was directed at you.

I'm calm, its you rb30/26 thats the angry one. More nos, bigger injectors, more boost, less tit grabbing at the nats, and do some 7's :P

R.I.P.S NZ Collaborator

R.I.P.S NZ

Posted
Posted
I'm calm, its you rb30/26 thats the angry one. More nos, bigger injectors, more boost, less tit grabbing at the nats, and do some 7's :happy:

Yes sir!! lol, I'll get all the non car stuff out of the way the night before, lol.

Next meet is this Saturday then another the following Sunday so I'll give it my best shot.

Rob

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...