Jump to content
SAU Community

Recommended Posts

gday.

im selling a GT30R top mount setup. details are

GT30R .63 rear housing - turbo is in good condition, seen around 50 to 60 thou ks

Mild steel manifold - 38mm runners

Tial copy external gate

Dump pipe

external gate piping and front pipe all to suit.

so basicly all your gonna need is a intake pipe from your afm to the turbo and oil and water lines to suit the turbo.

SOLDb]

ill get pics up in the next few days, at the moment i cant find any on my computer.

cheers

edit:- sold

Link to comment
https://www.sau.com.au/forums/topic/213561-gt30r-kit-to-suit-r33-sold/
Share on other sites

i cant give you a torque figure but suffice to say there was plenty of it. last dyno it pulled around 250rwkw on standard internals + or - around 10kw for different dynos.

i know the last time i went to a track day i was runnin outta grip at the end of my last session and started puttin it sideways through corners and was easily smoking the tyres,

depending on whether my shares keep going back up, might give you a call late next week, if it's still for sale.

when did this setup hit boost.

looking for something responsive. peak power is not too important.

to me this turbo was a very responsive turbo.

due to the smaller exhaust housing it was quite easy for the rb25 to spool it.

iirc i usually had full boost around 2.5k - 3krpm

its been a long time since i drove it so i cant remember, all i can tell you is that its a very good match up for a rb25 engine

I would love it, but the budget just can't stretch that far at the moment.

going in on wed for a new clutch and boost controller, and then probably fitting a wolf 3d a week later.

depending on how quickly i bounce back from that, you will hopefully be hearing from me



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...