Jump to content
SAU Community

Test And Tune 30th April

bazr33

By bazr33,
in Events

 Share

Recommended Posts

gumflapper Grand Master

gumflapper

Posted
Posted

thats considerably faster then mine :D PB of 14.03... also happened 2 b my 1st ever run... lol ive got a pretty sock 33 gtst... std turbo, 3" t-back zorst... pod, FMIC, PFC + H/C... ive just finished installing my kill switch and PowerFC into my 33... im not sure how "hard" i can push the PFC without a tune... im gonna go and get 1 soon but atm its ok 2 drive 2 and from work...

redbank plaza should be a pretty good location 2 meet... but like u said... some ppl will be going backwards...

Miss Niz Rising Star

Miss Niz

Posted
Posted
C'mon Miss niz, come for a run in the 34. I'ts heaps of fun, my car is only doing 14's so not that great. Still i loved it.

Haha, yeah i ran my ol' bluey down the strip a few years ago, but i won't be running the 34. She's just built for cruising, not racing... lol.

bazr33 Mentor

bazr33

Posted
  • Author
Posted

Depending on how the night goes, and we get a decent amount of people out. I would be happy do it again.

Had a couple of hickups with my car, but should still be going down the track. If not i will definately be there watching.

I probably will be taking footage on the night aswell, and would like to know how to upload it onto here, but unaware how to.

coaster Proficient

coaster

Posted
Posted

Im really keen to head up once i get my rims and rubber sent up from melb. Should be interesting to see how it goes with the gt30r and a decent set of drag radials under it. May not be able to make it for the next few weeks tho. I have a few exams coming up.

bazr33 Mentor

bazr33

Posted
  • Author
Posted (edited)

everthing seems to be looking well for wednesday night, although it was a bit windy today.

by the look of the weather it probably wont piss down, very unlucky if it does.

looking forward to see who rocks up on the night.

My car looks like it should be right for the night. But have had issues with those silicon performance radiator hoses i put on, just dont seem to seal properly.

Yeah they can withstand the heat but pain in the arse to secure so they dont leak. Also had air leaks coming out a couple of places, but now all sorted.

Just letting people know, that im planning on rocking up to test and tune close to when it opens, to get some runs down, then see some skylines head down the track later that night.

There has been a bit of interest and a couple of people are missin out on the night, due to cars not being ready, awaiting parts to be put on, or wont be here.

So if people would like to show some interest if we want to do another one, let us know and i'll arrange another one soon. ( But as said before we will see how this night goes, and get peoples opinions etc. after it)

Anyway see yas there,

Shake and Bake.

Edited by bazr33
blitza Collaborator

blitza

Posted
Posted

I got the turbo on but i can't get it tuned until this coming saturday... so i wont be there :D but post up when the next one is getting organised and I'll definately be there...

Everyone post up how they went and what times they do!

HR31_RB20DET Proficient

HR31_RB20DET

Posted
Posted

I'll be there but not racing, haven't had enough time to get the car up on the dyno.

Baz, let us know what time your heading out bro.

Wont be able to make it tonight - but let me know when the next one is as keen to go.

It's tomorrow night Brad. :)

bazr33 Mentor

bazr33

Posted
  • Author
Posted
Would have been there but my car got broken into and i need the funds to pay for that.

Not feeling lucky with this car.

Unlucky man, not good news to hear. was there much damage?

WEll hopefully ya get it all sorted out for next one.

And also hope someone catches the prick. too many mofos out there

Will also let you guys all know when the next one is.

Will let ya know paul when im headin out.

bazr33 Mentor

bazr33

Posted
  • Author
Posted

bit of a disappointing night, only one or two skylines were there on the night that i saw.

Couple of oil spills, and also back wheel of some guys car came off after doing his burnout.

Fair few commodores were there.

I made my achievement of the night to get into the 12's ( 12.8, 60ft - 1.989 - Mph 115)

Maybe next time we will get a few guys out.

Spoolup Mentor

Spoolup

Posted
Posted

Good effort. Is that on street tyres ?

How many runs did you get on the night ?

bit of a disappointing night, only one or two skylines were there on the night that i saw.

Couple of oil spills, and also back wheel of some guys car came off after doing his burnout.

Fair few commodores were there.

I made my achievement of the night to get into the 12's ( 12.8, 60ft - 1.989 - Mph 115)

Maybe next time we will get a few guys out.

bazr33 Mentor

bazr33

Posted
  • Author
Posted
Good effort. Is that on street tyres ?

How many runs did you get on the night ?

Nah was on MT Streets, but i had about 22psi in the tyres. ( skidded first )

Only managed to get two runs down as there were a fair few cars there.

Next time i will put the pressure of the tyres to 15psi, and see how i go then.

Hopeful then for a low 12, if i can get the 60ft down a little more to 1.8.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      GTR R34 Limp Mode

      By GTSBoy · Posted

      Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • steven7270
      GTR R34 Limp Mode

      By steven7270 · Posted

      So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Dose Pipe Sutututu
      SAUNSW - Cruise - Albion Park Aviation Museum - 9th August

      By Dose Pipe Sutututu · Posted

      Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • PranK
      Rusty roof repair

      By PranK · Posted

      Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • GTSBoy
      Rusty roof repair

      By GTSBoy · Posted

      That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...