Jump to content
SAU Community

Recommended Posts

I am not sure if this is a re-post, but anyway please everyone send this in!!!!

...............................................

The Motorsport Complex, at Ringwood Park, north of Raymond Terrace in NSW, is proposed to have a major upgrade and will be available for use by all enthusiasts.

Hopefully an email or a letter could be sent by you to the council stating your support for the project. (Information to assist you to do this has been attached).

Before you type out your submission, click on “Forward”, delete old addresses at the top of this email message, change my name at the bottom to yours and forward this on from you, to all in your address book & ask them to do the same and so on.

We need this to be an overwhelming response to the council.

This needs to be done before the 20th April 2008.

=============================

Email Contents

=============================

Support the Ringwood Park Motorsport Complex.

The DA for the Motorplex Ringwood Park Development upgrade has been readvertised in the

Port Stephens Examiner on Thursday 20 March 2008 by the Port Stephens Council (PSC). Revised plans and the Species Impact Study are on display and the Council has asked for written submissions.

We are asking everyone (especially those who live in the Port Stephens Council area) to support Motorplex and the MG Car Club Committee by writing to the council expressing your SUPPORT for this project.

Facts that may be mentioned, preferably in your own words:

 The revised plans seem to be designed to minimise the affects on all the threatened species populations, their habitats and the ecological communities. The proposed planting of additional flora and trees will significantly enhance the quality of all the Endangered Ecological Community areas.

 Venue for safe Senior & Junior driver development.

 Venue for awareness & defensive driving training.

• Police, Fire, Ambulance & Australia Post.

• High School driver education programs.

• Corrective Services (from the court system).

 Increased tourism, revenue and employment for the Raymond Terrace and surrounding areas.

 Venue for drivers from Central Coast, Newcastle, Upper & lower Hunter Mid North Coast as well as Port Stephens to compete in club level motorsport in a safe & controlled environment.

 Venue for Hunter region bicycle road race training & events (safe & off the roads).

 The land is already council approved and used for motorsport (including the drag strip in 1989)

 It would seem that Military Noise is more of a concern in the proposed Kings Hill development than any perceived noise problem from upgrading the Ringwood Park facility.

This may be your last chance to give your opinion to the council. Don’t let all our effort of the past seven years be in vain.

This effort has already cost over three quarters of a million dollars let alone the half million dollars plus, cost to the PSC. Much of this could have been used to upgrade the facility.

Also tell the council that you like to address the court about your concerns. (objectors, such as the C.R.A.B.S., group will be doing so). We must not be outnumbered.

Written letters or emails (submissions) must contain your name, address and phone number & have to be received by the council before the 20 April 2008.

Post letters to Emails send to

DA NO: 16-2002-42-1 council@portstephens .nsw.gov.au

Scott Anson Attention Scott Anson

P.O. BOX 42

Raymond Terrace NSW 2324 also cc to

[email protected]

(this will allow us to monitor the submissions the

council receives)

Send this information to all in your “address book”, and then ask them to send the information on to all in their “address books”.

Greg Hunter. President. John Collins. Vice President. Peter Lee. Director.

MG Car Club Newcastle. Motorplex Australia.

1st April 2008.

I'll definitely be sending a letter in.

Thought it was cool that one of my uni lecturers sent that letter and a copy of the council DA around to all the engineering students at Newcastle Uni, thats how I found out...

Help out on this people!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...