Jump to content
SAU Community

Recommended Posts

hey all,

As some of you might know i work for CBC and im just letting you all know i can get Wheel bearing kits for R32, R33s, i havent looked up R34s but im pretty sure id b able to hook something up.

im at the holden hill branch on North east road, ask for me and ill look after you all :D

(also do gates racing belts (alt, A/C, P/S), timing and tensioner kits)

cheers joel.

Link to comment
https://www.sau.com.au/forums/topic/214386-skyline-wheel-bearing-kits/
Share on other sites

hey all,

As some of you might know i work for CBC and im just letting you all know i can get Wheel bearing kits for R32, R33s, i havent looked up R34s but im pretty sure id b able to hook something up.

im at the holden hill branch on North east road, ask for me and ill look after you all :D

(also do gates racing belts (alt, A/C, P/S), timing and tensioner kits)

cheers joel.

Got a ballpark figure on them 'discount' kits?

:D

when i turn my A/C on it makes a very bad squeaking noise.....does that mean my belts are stuffed or the tensioner pulleys are on their way out.....if so can you please PM me a ballpark figure on those for a r33

Joel will be dropping sometime soon for some of the Gates auxiliary belts. :blink:

when i turn my A/C on it makes a very bad squeaking noise.....does that mean my belts are stuffed or the tensioner pulleys are on their way out.....if so can you please PM me a ballpark figure on those for a r33
Check for wear on the belt first, otherwise it just needs tightening up.

Hello,

I was up there the other day to get an o-ring for a oil filter bracket i was making. I saw your skyline at the door but didn't know you were a SAU member. Can you give me a price on some S13/180sx front wheel bearings ( i think i know who much they are, last time i was quoted $90). I Know your timing belt tensioner and idler kits were sh#t loads cheaper than Nissan's price.

Thanks

Dale

Edited by D_stirls
I Know your timing belt tensioner and idler kits were sh#t loads cheaper than Nissan's price.
You're not kidding there when I did my 100K kms service, I had to go through Nissan (paid almost $400) cos CBC were out of stock & all their interstate suppliers wouldn't sell theirs to them as they were running low as well :blink::down:.

hey yall

i just got in 2 Front wheel bearing kits and 2 Rear wheel bearing kits.

retail they are like $150 for fronts and almost $200 for rear lol but i can do them for closer to 80-90.

D_stirls ill look into it for ya bro. just give me a bell just incase i forget ;p.

it sure is mine nightcrawler but its a 2 door O.o and the front bar aint tidy at all lol. just hit a damn curb the other day. still spitting chips :P

cubes i can hook you up on the belts but im not sure about the tensioner pulley. (lol i was gonna say bring it in for me to look at but i got 1 on my car LAWL) ill see what i can do there :D

cubes i can hook you up on the belts but im not sure about the tensioner pulley. (lol i was gonna say bring it in for me to look at but i got 1 on my car LAWL) ill see what i can do there :D

cheers.. CBC definitely do a suitable bearing as I have replaced it some time ago but the old man with and his ham fist buggered the pulley smacking it in, now the bugger causes the belts to squeek.

I've grabbed another will pop the bearing out with the press and bring it in. The press has to be one of the best tools I've bought; used it for almost everything. :P

Any idea what I'm looking at for 3 of those gates belts? powersteer, a/c and water.

around 20 each id say man, maybe a lil less.

they are

4pk835

4pk925

4pk945

im pretty sure they are the ones on mine.

ill have to get them in from VIC so call me up first cubes then ill buzz ya when they are in or something.

i think i might need some front wheel bearings. ill sus out my car and see if it is the bearings going out.

might just get front and rear bearing at the same time.

could you tell me a price and ill come in and get some off ya.

cheers

Can you help me out with a price to replace the bearings in my hubs

the front are stagea awd and the rear normal gtst and do they come with seals, do you do seals, or do i get those elsewhere

this is for a 5 stud conversion hubs are'nt in the car yet

thanks for your help :D

nps adrian :D

steve the Rear wheel bearing kit doesnt come with a seal but its not a normal tapered roller bearing (most common wheel bearings). Ive never pulled my wheels off so im not sure if a seal is needed, i wouldn't think so seem as the bearing is sealed already, but yes we do have seals and get get pretty much any seal under the f**king sun ;) As for the fronts ill need to know what year stagea they are from and we can go from there.

cheers

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...