Jump to content
SAU Community

Recommended Posts

The rims probably are the current weakest link. Do you have any pictures of the rims you are replacing them with? The new spray sounds good, when is that being done?

I fully realise why/how it could apeal to many poeple.. but persoanly.. to me.. I cannot say Im a fan..

for the poele that like that stlye of modification.. that car is top shelf!..

for others.. just money that could be spent on other areas..

The rims probably are the current weakest link. Do you have any pictures of the rims you are replacing them with? The new spray sounds good, when is that being done?

same rims just wider on the rear with a 5" dish

I fully realise why/how it could apeal to many poeple.. but persoanly.. to me.. I cannot say Im a fan..

for the poele that like that stlye of modification.. that car is top shelf!..

for others.. just money that could be spent on other areas..

other areas such as?????

i could never stand to see such gorgeous paint be sanded off for a respray.

NEVER!

leave the guards if it saves the paint :O

nah the paint is showing its age

after 5 years of getting banged around its got a couple of imperfections that really annoy me

the new paint will be 100x better just wait and see :D

I'm a big fan of the paint job... too bad it's getting old.

My motor and suspension etc is almost complete, would love to sink some cash into a paint job like that. Then I can buy a daily and stop wasting money.

other areas such as?????

Some people put performance first, so the money spent on the paint and interior could have gone to lightening reinforcing the chassis, or making more power from the engine (or making it more resistance to generating that power level for longer periods of time), or buying a GT-R and doing almost the same thing with ATTESSA, etc.

If someone else sank the time/money/effort that you have into making this car into a pure track monster, it wouldn't be what you've got. Its not what you wanted to do, but that's exactly his point.

fair enough

how ever the only thing i haven't done is lighten it to buggery and make it stiff as f**k which IMO is something thats too impractical for the street anyway

-ive done the motor (RB25/30 which is responsive and relaible enough to be daily driven)

-almost finished building a tough gearbox (about week and it will be in the car)

-suspension has been addressed (coilovers, urethene bushes, every arm is replaced with adjustable ones)

-brakes have been upgraded (bigger rotors, braided lines, and good pads, soon to be upgraded again though)

at the end of the day its not just a car thats all tarted up to look good but its an all round package

if i put some smaller rims on it get a wheel alignment and strip the interior i could track it no problems

obviously its not going to be as quick as a dedicated circuit car but its all about having fun right :D

Did you say a RB25/30 hybrid? The photo of the engine bay that follows your comment shows 30 on the head and 26 on the cam gear cover. So what combination have you used? I'm looking at a single turbo 30 block under 26 head in my 32. How much work was involved in yours?

BTW, regarding the comments on spending money on looks - as unique as 2GU UP looks, its a fairly simple and modest example of what is basically a GTR. It has a nice wide body, five spoke rims and a sweet paint job. No ridiculous bodykits, wings or any other glitter has been used:

http://www.john-eva.co.uk/Images/nissan_sk...tr_by_roobi.jpg

Meanwhile its not slow! I would call spending $13,500 on lightening a whole car an extravagent expense.

I think if anything the modestly modified exterior is slightest dishonest in hiding the true potential of the motor and suspension.

Any thoughts?

Did you say a RB25/30 hybrid? The photo of the engine bay that follows your comment shows 30 on the head and 26 on the cam gear cover. So what combination have you used? I'm looking at a single turbo 30 block under 26 head in my 32. How much work was involved in yours?

his car started life as a non turbo Rb20de powered R32 GTS.

it now has a 3L bottom end with RB25 head (but using RB26 cam covers etc)

he had a special coil cover made to say 3L

and the cam gear cover is just an aftermarket rb26 item.

well that's what I remember of it all anyway.

there are always those jelous people that say there not jelous, it was a project car, an it wasnt a group project were 150 people would love the look of it when its complete, but a personal project which he obviously likes..

car is f*kin sexy, yes i am jelous an i do admit it...

thanks for the comments people

DRDOOF - two tone candy red over candy cherry black (always lover the darker lower half look)

Drift Learner - building and fitting the actual motor wasn't anything major and everything was straight forward, but the detailing and custom work was the hard part

PM-R33 - i also put the same effort into every customer car

also about the motor, GTST is correct RB25/30 with 26 covers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - there is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
    • no one recommending speedtek gearsets?   i'm in the same boat as Cosline but rwd, I am holding boost back in third to 600nm at the hubs to save the gear as i make nearly 750nm at the hubs on a mainline
×
×
  • Create New...