Jump to content
SAU Community

Recommended Posts

The rims probably are the current weakest link. Do you have any pictures of the rims you are replacing them with? The new spray sounds good, when is that being done?

I fully realise why/how it could apeal to many poeple.. but persoanly.. to me.. I cannot say Im a fan..

for the poele that like that stlye of modification.. that car is top shelf!..

for others.. just money that could be spent on other areas..

The rims probably are the current weakest link. Do you have any pictures of the rims you are replacing them with? The new spray sounds good, when is that being done?

same rims just wider on the rear with a 5" dish

I fully realise why/how it could apeal to many poeple.. but persoanly.. to me.. I cannot say Im a fan..

for the poele that like that stlye of modification.. that car is top shelf!..

for others.. just money that could be spent on other areas..

other areas such as?????

i could never stand to see such gorgeous paint be sanded off for a respray.

NEVER!

leave the guards if it saves the paint :O

nah the paint is showing its age

after 5 years of getting banged around its got a couple of imperfections that really annoy me

the new paint will be 100x better just wait and see :D

I'm a big fan of the paint job... too bad it's getting old.

My motor and suspension etc is almost complete, would love to sink some cash into a paint job like that. Then I can buy a daily and stop wasting money.

other areas such as?????

Some people put performance first, so the money spent on the paint and interior could have gone to lightening reinforcing the chassis, or making more power from the engine (or making it more resistance to generating that power level for longer periods of time), or buying a GT-R and doing almost the same thing with ATTESSA, etc.

If someone else sank the time/money/effort that you have into making this car into a pure track monster, it wouldn't be what you've got. Its not what you wanted to do, but that's exactly his point.

fair enough

how ever the only thing i haven't done is lighten it to buggery and make it stiff as f**k which IMO is something thats too impractical for the street anyway

-ive done the motor (RB25/30 which is responsive and relaible enough to be daily driven)

-almost finished building a tough gearbox (about week and it will be in the car)

-suspension has been addressed (coilovers, urethene bushes, every arm is replaced with adjustable ones)

-brakes have been upgraded (bigger rotors, braided lines, and good pads, soon to be upgraded again though)

at the end of the day its not just a car thats all tarted up to look good but its an all round package

if i put some smaller rims on it get a wheel alignment and strip the interior i could track it no problems

obviously its not going to be as quick as a dedicated circuit car but its all about having fun right :D

Did you say a RB25/30 hybrid? The photo of the engine bay that follows your comment shows 30 on the head and 26 on the cam gear cover. So what combination have you used? I'm looking at a single turbo 30 block under 26 head in my 32. How much work was involved in yours?

BTW, regarding the comments on spending money on looks - as unique as 2GU UP looks, its a fairly simple and modest example of what is basically a GTR. It has a nice wide body, five spoke rims and a sweet paint job. No ridiculous bodykits, wings or any other glitter has been used:

http://www.john-eva.co.uk/Images/nissan_sk...tr_by_roobi.jpg

Meanwhile its not slow! I would call spending $13,500 on lightening a whole car an extravagent expense.

I think if anything the modestly modified exterior is slightest dishonest in hiding the true potential of the motor and suspension.

Any thoughts?

Did you say a RB25/30 hybrid? The photo of the engine bay that follows your comment shows 30 on the head and 26 on the cam gear cover. So what combination have you used? I'm looking at a single turbo 30 block under 26 head in my 32. How much work was involved in yours?

his car started life as a non turbo Rb20de powered R32 GTS.

it now has a 3L bottom end with RB25 head (but using RB26 cam covers etc)

he had a special coil cover made to say 3L

and the cam gear cover is just an aftermarket rb26 item.

well that's what I remember of it all anyway.

there are always those jelous people that say there not jelous, it was a project car, an it wasnt a group project were 150 people would love the look of it when its complete, but a personal project which he obviously likes..

car is f*kin sexy, yes i am jelous an i do admit it...

thanks for the comments people

DRDOOF - two tone candy red over candy cherry black (always lover the darker lower half look)

Drift Learner - building and fitting the actual motor wasn't anything major and everything was straight forward, but the detailing and custom work was the hard part

PM-R33 - i also put the same effort into every customer car

also about the motor, GTST is correct RB25/30 with 26 covers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...