Jump to content
SAU Community

Recommended Posts

My black GTS-t used to look clean for about an hour after washing it.

My gunmetal grey GTR is a lot more forgiving.

Shame about the lack of kebabs. I was hangin for one of them. Got lamo substitute subway instead...

  • Replies 93
  • Created
  • Last Reply

Top Posters In This Topic

AJ,

Nice pics dude!

Could you send a couple of them to me?

My car is no. plate UNM.260. The pics of that, and a few of the entire line up of cars would be mad if you can.

Please send to: [email protected]

Thanks mate!

well most cars were clean. lol. i wanna see the pics of my car that ap took... on someone else's camera

HAHAHA!!! :(

Good turn out, decent amount of cars, lots of laughts and always good to put a few names to faces!

BIG THANKS to LEANBAK and RCHOO to organise the meeting and having a word with the security officers.

BTW How funny was the guy in the red Supra.

He was going on about how 6 of his friends have Skylines and he beat all of them except for one on his N/A Supra 180kW or what ever hes got...

And my friend Ash could not stop laughing his head off, he actualy had to avoid the guy and stand behind my car to make sure he wasn't seen laughting about Mr. Supra.

We all said "No Hooning / revving" and he does laps in the car park with his muffler going off!

Anyway he are some pics. Thanks to LEANBAC with............. My camera... hehe!!

post-46584-1208483247_thumb.jpg

post-46584-1208483277_thumb.jpg

post-46584-1208483295_thumb.jpg

post-46584-1208483314_thumb.jpg

post-46584-1208483329_thumb.jpg

post-46584-1208483345_thumb.jpg

post-46584-1208483370_thumb.jpg

post-46584-1208483388_thumb.jpg

post-46584-1208483402_thumb.jpg

post-46584-1208483417_thumb.jpg

post-46584-1208484027_thumb.jpg

post-46584-1208484055_thumb.jpg

post-46584-1208485009_thumb.jpg

post-46584-1208485042_thumb.jpg

Dezz: Hey Basti, how ya going?

Basti: Hey Dezz! I think I figured out how to use a manual... Rev it to the red line and change gears...

Dezz: Thats it! :blink:

krzysiu: :huh: WTF thats my car!

Edited by (00)SKYLINE(00)

HAHAHA!!! :blink:

Good turn out, decent amount of cars, lots of laughts and always good to put a few names to faces!

BIG THANKS to LEANBAK and RCHOO to organise the meeting and having a word with the security officers.

BTW How funny was the guy in the red Supra.

He was going on about how 6 of his friends have Skylines and he beat all of them except for one on his N/A Supra 180kW or what ever hes got...

And my friend Ash could not stop laughing his head off, he actualy had to avoid the guy and stand behind my car to make sure he wasn't seen laughting about Mr. Supra.

We all said "No Hooning / revving" and he does laps in the car park with his muffler going off!

Anyway he are some pics. Thanks to LEANBAC with............. My camera... hehe!!

Right on Jamie! That dude was a laugh!

I totally smoked him thru the round abouts on the way there. I'm not much of a supra fan myself, especially N/A ones... That thing was too loud. He's

gonna get pulled over and the cop will probli laugh, "its not even a turbo, ha!"

Some of those snaps are awesome man.

The security guards were half decent once we actually spoke to them. Just goes to show tho, you have to make sure everyone keeps a low profile

when in a large group like that, particularly at a shopping centre.

BTW How funny was the guy in the red Supra.

He was going on about how 6 of his friends have Skylines and he beat all of them except for one on his N/A Supra 180kW or what ever hes got...

And my friend Ash could not stop laughing his head off, he actualy had to avoid the guy and stand behind my car to make sure he wasn't seen laughting about Mr. Supra.

We all said "No Hooning / revving" and he does laps in the car park with his muffler going off!

Boys will be boys....

Dezz: Hey Basti, how ya going?

Basti: Hey Dezz! I think I figured out how to use a manual... Rev it to the red line and change gears...

Dezz: Thats it! :thumbsup:

krzysiu: :) WTF thats my car!

hahahaha

Anyone found posting photos of my car from last night will be banned. :D

lol. sif you can ban anyone. post away ppl

hahah i was early when we all met up and saw the guy with res supra there and asked him if he was waiting for the skyline meetup and he didnt know about it so him and his mate with the XR6 decided to stay and see how it would turn out.was a awesome turn out hope to do another one soon!

Edited by b3za
here a few pics, i aint the best with a camera.

and if u want ne of the pics let me know as these are the smaller ones. cheers

082_82.jpg

083_83.jpg

084_84.jpg

088_88.jpg

hey man can you send hi res versions of these pics to nirojb[at]msn.com plz? and any other pics you may have of my car

here a few pics, i aint the best with a camera.

and if u want ne of the pics let me know as these are the smaller ones. cheers

080_80.jpg

089_89-1.jpg

If you could email these through to dogknight[at]gmail.com that would rock. Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...