Jump to content
SAU Community

Envy Imports + Evidence Onlines Gtr Progress Update


Recommended Posts

Selection of pics from the receival of Envy Imports Premium Edition GTR to the testing phase (rear interior, seats, headlight and front bar removed) to the unveiling at surfers paradise last night.

Evidence Online will supply Envy Imports with the evidence documentation and testing for Envy Imports to be able to comply this and 24 other new GTR's under the new low volume scheme.

Please note: Pics are compressed for dial-up viewing.

PS - the car was being kept in our ALARMED and secure shed, but is now on its way down to emissions testing.

The thought of it being stolen was the primary reason i waiting until the car is in an unkown location before posting on any forums.

Removing the rear interior and seats was necessary to conduct a pull back test on the seats and pull forward test on the child restraint anchorages. Yes I know, bit stupid having to put CRA's in a sports demon like the GTR, but ADR's will be ADR's. The front bar needed to be removed in order to remove the headlamp. Due to the ADR's, even with auto-leveling HID lights, with no washer or wiper on the headlight, we have to convert the lights to normal bulbs and have the light tested by a photometric laboratory.

post-11101-120849401364797933.jpg

post-11101-12084940192005127210.jpg

post-11101-12084940291556524826.jpg

post-11101-1208494039633093163.jpg

post-11101-12084940481478773970.jpg

post-11101-120849406097661892.jpg

post-11101-12084940721658918871.jpg

post-11101-12084940831701132078.jpg

post-11101-1208494097878798271.jpg

post-11101-1208494109862413328.jpg

post-11101-1208494119287126075.jpg

post-11101-12084941341455912594.jpg

post-11101-12084941441765367431.jpg

post-11101-12084941571861675873.jpg

post-11101-12084941711999320509.jpg

post-11101-12084941781702586691.jpg

post-11101-1208494188954025568.jpg

post-11101-1208494201863312415.jpg

I know what you mean. Generally people just copy what you've said and post everywhere, but someone has taken my comments, edited and added their own bits to make it look like theres an opportunity for more workshops to get involved in this car compliance wise, which is untrue.

Can I please ask that no one uses these photos or any wording from my post to publish on any other websites or publications without the consent from either Herman (Envy Imports) or myself (Evidence Online).

I appreciate your assistance.

Ben

Lol..

I know what you mean. Generally people just copy what you've said and post everywhere, but someone has taken my comments, edited and added their own bits to make it look like theres an opportunity for more workshops to get involved in this car compliance wise, which is untrue.

I know what you mean. Generally people just copy what you've said and post everywhere, but someone has taken my comments, edited and added their own bits to make it look like theres an opportunity for more workshops to get involved in this car compliance wise, which is untrue.

:whistling:

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...