Jump to content
SAU Community

Recommended Posts

im selling my r32 gtr

what do people think is a realistic price

considering car is basically immac, has had a major service incl new clutch and genuine timing belt etc.

stock standard, no mods what so ever.

i.e. i feel it would be worth more that most modded ones, to the right buyer :D

Link to comment
https://www.sau.com.au/forums/topic/215623-whats-a-stock-r32-gtr-worth/
Share on other sites

20k absolute max. Stockish GTRs go for about 18-20k.

It depends on the buyer, but most would prefer one with all your basic mods done to it already.

You can get ones in good condition, making nice power with healthy engines for 20-24k.

Then there are the lemons which go for 16-18k.....

Edited by IOWNU
might be.

but im thinking i may also want a 4 door

i thought my car would have sold already to be honest.

Ah ok, you starting a family sometime soon... Hehe!!

Need some funds for a house, lol!

BTW that 4 door better be a R32, cuz those 4 doors look nice with the Vertex kit.

On the subject of your R32 in stock form, I have seen Local AUS delivered GTR's hold a value of $30 000+. Were talking full AUS Spec with the Nissan badge on the bonnet not the "S" Badge.

Advertise it as Stock JDM R32 GTR + Log books, history (Which I think you have), $30 000 and see how you go.

Price is negotiable I guess. Preferably sell it to a decent buyer, not some kid whos gona tear the thing up in 2 weeks. But as long as they have paid you thats all that matters. Still just for a peace of mind it goes to a good home.

depends. what year model is it? do you have the japanese log books and service records? what colour is it? what is the interior like? any blemishes? dash bubble? faded seats? soft seats? seat wear? steering wheel wear? how many kms? faded or worn door and window seals? when you say it's stock does it have stock steering wheel? stock airbox? stock gear knob? stock wheels? all these things are important. so from the limited info you have given it could be worth as little as $19K or as much as about $27K.

I know original and very good quality/low mileage R32 GTR's command a very high price, up to and above 30k. So it really depends how high the quality is.

Don't sell it to someone looking for a thrasher if you want a higher price is my opinion. Unless they're willing to pay more for a reliable, unabused GTR.

GL with the sale mate.

stock wheels

stock gear knob

stock steering wheel

stock exhaust

stock airbox

stock boost

stock everything

seats are in excellent condition, par the drivers has some wear, as they all do, but other than that interior and exterior is basically perfect, considering the car is 18 years old.

what year model is it? going by 18yo it's a 90 model? do you have the original owners manual, log book and service book (really should have all 3). also how many kms? and can they be substantiated by the log books and service books? has it had any accident history?

given it's a 90 model even if in very nice original condition I would say low 20s are about what you can hope for. if it was a post model change model (ie post 91) it would be a few grand more. if it were a 94 model or better yet a vspec and in the condition you describe (also assuming no accident history and very straight underneath) then you'd be looking at high 20s.

what year model is it? going by 18yo it's a 90 model? do you have the original owners manual, log book and service book (really should have all 3). also how many kms? and can they be substantiated by the log books and service books? has it had any accident history?

given it's a 90 model even if in very nice original condition I would say low 20s are about what you can hope for. if it was a post model change model (ie post 91) it would be a few grand more. if it were a 94 model or better yet a vspec and in the condition you describe (also assuming no accident history and very straight underneath) then you'd be looking at high 20s.

dont have the books, as it was a grey import and these seldom come with the car

passed all compression tests etc with flying colours

20 or low 20's i would be happy with.

^^Well try your luck with mid to high 20's and the buyer will bargen you down... So start high then go down.

If ya start at low 20's and if the buyer bargins you down to the $19 000 (Give or Take afew hundred) they gonna say "SWEET"

BTW you bought the car for like very good price didn't you? So you probley make a profit on this anyway.

^^Well try your luck with mid to high 20's and the buyer will bargen you down... So start high then go down.

If ya start at low 20's and if the buyer bargins you down to the $19 000 (Give or Take afew hundred) they gonna say "SWEET"

BTW you bought the car for like very good price didn't you? So you probley make a profit on this anyway.

well not really

because by the time i did the clutch and timing belt and stuff im really going to just about break even.

well not really

because by the time i did the clutch and timing belt and stuff im really going to just about break even.

Right.

Well try your luck, but if your getting shit offers then I just keep it.

Hard to find stock R32 GTR's.

BTW did you still want a newer gear knob?

be realistic in price and it will sell. you can import a stock one in the condition you mention for easy 20k. I'd have a hard time selling mine for what its insured for, but that is due to to the fact most people want something newer for that money.... Mine is one of the mint 89's that I bought bofore everyone jumped in on the act and I'll be keeping it as I couldn't replace it with another.

be realistic in price and it will sell. you can import a stock one in the condition you mention for easy 20k. I'd have a hard time selling mine for what its insured for, but that is due to to the fact most people want something newer for that money.... Mine is one of the mint 89's that I bought bofore everyone jumped in on the act and I'll be keeping it as I couldn't replace it with another.

Yeah true that!

I have been thinking about getting mine back to stock,

Eg. I want to put the spoiler back on as it never came with one cuz the previous owner took it off. Easily sorced, just get my friends grey import and remove the whole boot lid off mine and replace it with his + its the same colour, only need to wash and polish it up. (Only thing is that I gota change the key hole to the boot lock). And he keeps telling me it looks better without the spoiler.

Paint my inlet plenum black again, cuz my mechanic washed it all off after doing my turbo rebuild.

The stock rims I would like to have back but the car came with 17" Rays Wheels and don't really wana go back down to 16".

LOL! After all this talk, Orion I think you should just keep it. You might regret the sale.

Edited by (00)SKYLINE(00)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...