Jump to content
SAU Community

Recommended Posts

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

1. No - everything stays in Japanese, maybe in the future but will be at cost - not determined yet whether it will be successful.

2. No - japanese maps only - can't do anything about it, end of story.

However you can install something "on top" of the TV's AUX input, be that an Australian navigation or TV.

Do a search, there's other smaller threads here and there about things you need to know...

There have been heaps of thread about this here:

Regarding translation: http://www.skylinesaustralia.com/forums/So...re-t194126.html

English sticker stick-on for the buttons (not really useful): http://www.skylinesaustralia.com/forums/En...pl-t192636.html

Regarding nav: http://www.skylinesaustralia.com/forums/35...av-t157379.html

Regarding FM Band Converter (if you have Bose factory option and would like to keep the headunit):

http://www.skylinesaustralia.com/forums/Fi...te-t198015.html

I would have used the "Doh Kitty" to answer this question.

But what RS said is right. There are heaps and heaps and heaps of threads on here already to go through. Just keep reading and you'll see where all this is up to.

I would have used the "Doh Kitty" to answer this question.

But what RS said is right. There are heaps and heaps and heaps of threads on here already to go through. Just keep reading and you'll see where all this is up to.

Thanks All - I found a place in Haberfield (Syd) called "Revolution Electronics" that can set it all up in english, replace the DVD, format TV and set the Sat Nav to Australian. I've seen them just finish off another V35 and it all work great. The cost varies from $2K to 3.5K depending on the brand the electronic mods + reprogramming of firmware.

So I reckon, I rather put the cash up for a set of brembo brakes : ) watchya think?

Thanks All - I found a place in Haberfield (Syd) called "Revolution Electronics" that can set it all up in english, replace the DVD, format TV and set the Sat Nav to Australian. I've seen them just finish off another V35 and it all work great. The cost varies from $2K to 3.5K depending on the brand the electronic mods + reprogramming of firmware.

So I reckon, I rather put the cash up for a set of brembo brakes : ) watchya think?

The Jap - English conversion of all the screen except the Navigation screens should be avilable by June and cost should be around $200 - 250. This cost is still a bit of a guess as I am waiting on the cost from the company developing the conversion but it is possible. I have a demo version (a few screeens converted) already installed and it is quite easy to do.

Cheers

Andy

The Jap - English conversion of all the screen except the Navigation screens should be avilable by June and cost should be around $200 - 250. This cost is still a bit of a guess as I am waiting on the cost from the company developing the conversion but it is possible. I have a demo version (a few screeens converted) already installed and it is quite easy to do.

Cheers

Andy

Thanks Andy, that would be sweet. Keep us posted.

Wow? translate to english? I don't think so... the closest we got is a russian company working on it and still about a couple of months away before an actual dvd-rom patch is released...

Replace DVD ROM? Do they remove it? That unit controls all AV related function in your dash, remove it your LCD won't show any pic anymore.

Have you got any details what component they're putting in? Got any website?

Thanks All - I found a place in Haberfield (Syd) called "Revolution Electronics" that can set it all up in english, replace the DVD, format TV and set the Sat Nav to Australian. I've seen them just finish off another V35 and it all work great. The cost varies from $2K to 3.5K depending on the brand the electronic mods + reprogramming of firmware.

So I reckon, I rather put the cash up for a set of brembo brakes : ) watchya think?

Hi my friend.

You has been misleading by that guy just as lots of other friends here.

That guy do not convert your system, He just replace it, by doing that you lost all of factory computer function like trip computer and all the bottom on dash do not work any more(expect the one that he used to on/off the new system). :thumbsup::(;)

To me, I will not do that even just for $500.

Hi my friend.

You has been misleading by that guy just as lots of other friends here.

That guy do not convert your system, He just replace it, by doing that you lost all of factory computer function like trip computer and all the bottom on dash do not work any more(expect the one that he used to on/off the new system). :):P:)

To me, I will not do that even just for $500.

Yeah. I agree with you all. He replaces everything with aftermarket stuff. Too expensive.. As I said.. I'll just buy a set of Brembo Brakes instead.

Yeah. I agree with you all. He replaces everything with aftermarket stuff. Too expensive.. As I said.. I'll just buy a set of Brembo Brakes instead.

vev,

consider this though.. on the street you wouldn't notice the difference between brembo's or the OEM items

where as with a sorted out audio-visual system you can use it everyday and enjoy it

just something to consider. my opinion - brembo's on the street are for looks only

I read that factory V35 Brembo has only a little power over standard item, and therefore was no longer an option from 2005 onwards.

On US websites, the G37 (V36) factory non-brembo calipers are MUCH BIGGER than the G35 (V35) brembo calipers, and therefore is a much favourable upgrade compared to the V35 Brembos... together with a 19" rims (18" won't fit). Factory v35 brembo fits under 18", which shows they are not that much bigger than standard... and they still fade on the track after a few laps... and most owners in USA replace them with even bigger brembo or other calipers like ap racing, willwood items etc.

vev,

consider this though.. on the street you wouldn't notice the difference between brembo's or the OEM items

where as with a sorted out audio-visual system you can use it everyday and enjoy it

just something to consider. my opinion - brembo's on the street are for looks only

If After the look only, This Brembo Cover for around $30 a part is a good choise :cool::cool::cool::cool:

3425_1.JPG

7dc5_1.JPG

Even an AMG look ;):D:D

242f_1.JPG

242f_1.JPG

And Porsche

ec08_1.JPG

LOL Frank, isn't that a crime yet?

I have not driven a 35 with the twin piston front brakes, but they would want to be bloody good. I cannot forsee how they would be as good as the four piston brembos.

Fade would have more to do with pad and fluids.

Maybe Bobby (aka NISMO) can shed some light, having owned both?

LOL Frank, isn't that a crime yet?

I have not driven a 35 with the twin piston front brakes, but they would want to be bloody good. I cannot forsee how they would be as good as the four piston brembos.

Fade would have more to do with pad and fluids.

Maybe Bobby (aka NISMO) can shed some light, having owned both?

Yeah, personally I gotta say there is a difference.

I've had both cars out on the track and the to me the Brembo's were streets ahead.

As for fading, isn't that more a product of the brake fluid/pads and maybe rotors instead of the calliper itself? Woops just noticed Graeme already said that.

The 05 brakes are single piston (well they were on the auto anyway). It definately is a big pad, much bigger than the non Brembo 350z's but still to me the Brembo held up much better lap after lap than what the non Brembo's did.

I went out with improved fluid in both, and stock pads in both and with my driving (not that good :-) ), the non Brembo's lasted at best 2-3 laps with hard driving at Wakefield. The Brembo's on the other hand were more than capable of lasting a session with me.

Scathing, where are you??

Scathing is a much better driver than me, and upgraded his non Brembo's to Brembo. He pushes the limits of the callipers and will be more suited to comment than me. But again from my experience the Brembo's are streets ahead of 05 standard auto brakes.

as i said, when you put track-work aside, i can't see the brembo's makign a huge difference on the street

how do they compare on the street, bobby?

Hey Waz,

on the street just general traffic all breaks will pretty much work the same. In hotter weather I do notice that the Brembo's are much more consistent. Sometimes I sit in traffic for over an hour and in summer it is slightly noticeable.

But in a hard breaking situation on the street I would have to say that I would have more confidence in the Brembo's for no other reason than the fact that they held up much better at the track.

  • 2 weeks later...
Hey Waz,

on the street just general traffic all breaks will pretty much work the same. In hotter weather I do notice that the Brembo's are much more consistent. Sometimes I sit in traffic for over an hour and in summer it is slightly noticeable.

But in a hard breaking situation on the street I would have to say that I would have more confidence in the Brembo's for no other reason than the fact that they held up much better at the track.

Hey all.. I gonna pick my Black Skyline V35 (Manual) tomorrow from the dealership. Freaking can't sleep!

Oh and yeah i spent extra cash on a set of Brembos (the real thing - not the covers) and a good set of wheels..

Will post pics soon!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...