Jump to content
SAU Community

Recommended Posts

hey guys im thinking of painting my gold racing hart rims black.. just getting over it :) what do u guys think and would it be hard to do?? obviously want a decent job haha put up sum pics so u can sus cheers.

post-47249-1208694120_thumb.jpg

post-47249-1208694284_thumb.jpg

Edited by chef_stagea
Link to comment
https://www.sau.com.au/forums/topic/215684-painting-my-rims/
Share on other sites

Hmmmm: I'm about to do the same: R34 GTR rims to be painted really dark grey, almost black, but with heaps of metallic, and plenty of clear... I love the Dark rims look!

so u rekn i should do it? whats the best way to go about it?

to paint your rims you will first have to clean them with thinners to remove all dirt/crap. then sand them with 400wet and dry. then apply a good undercoat once it has dried sand again with 400 wet and dry remember to apply water to the rims. leave it to dry completely. now your ready to paint have your chosen paint ready to use. apply several lite complete coats to achieve a good result. and finish with a coat or to of clear. hope that helps :)

i had my rims (now on kylies stagea) powder coated gloss black, cost me $40 a rim, and came out perfect!

i'll likely be getting kylies old 18's (that are on my legnum :3some:) powder coated a gunmetal grey too.

painting has more options, however i'm lead to believe powder coating is a stronger coating.

painting has more options, however i'm lead to believe powder coating is a stronger coating.

Yeah me too, powder coating is the way to go I think, $40/rim is a bargain :3some: wish there were places that cheap in Adelaide

well I can't talk for R338OY but I say... yes.

and be sure to let us know when you get your 'stagea art' published in a magazine :3some:

where should i start looking to get it done in adelaide?? oi im a maddd man with 'paint' :)

i work in a factory in regency park and am the powder coater there. i dont have sand blasting at my disposal but i can paint anything u want. dont have all the colours under the sun but i can assure u of a good job.done a few sets in my time plus other engine parts etc. i will just leave clear coating to u guys (spray can will do fine) or i can buy clear powder finish at an extra cost but that just depends on how many people want parts done as it will leave the finish in better condition for a longer time. i dont like to advertise that i do this as a job much cause everybody wants something done but im glad to help out everynow and then.

paint them shadow chrome - best colour in the world for rims imo

its like a polished version of gunmetal, and it looks wicked on a silver car!

PS here's a great DIY i found whole searching for V35 stuff: http://g35driver.com/forums/showthread.php...ight=paint+rims

it also shows you the shadow chrome look in all its glory!

Edited by WazR32GTSt
paint them shadow chrome - best colour in the world for rims imo

its like a polished version of gunmetal, and it looks wicked on a silver car!

PS here's a great DIY i found whole searching for V35 stuff: http://g35driver.com/forums/showthread.php...ight=paint+rims

it also shows you the shadow chrome look in all its glory!

Thats a great DIY tutorial might have to give it a go... i love my R34 GTR rims as they are but my stock Autech rims really could do with a bit of flare and as i am going to be putting them on soon as my winter rims i might just have to get painting... Mind you they are a multi thousand spoke type wheel not like these ones this guy was doing... may be a touch harder. Still worth a shot, i like the shadow chrome look and that paint he got looked excellent had a real sparkle 2 it.

i gotmy rims painted gloss black with gold glitter and heaps of clear looks mad best thing i ever got done .painter hated me as it took him hours to get the rims clean as tire shine soaks into the alloy which i never knew but yeh .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...