Jump to content
SAU Community

Recommended Posts

G'Day Skyline Guru's,

I am calling upon your collective expertise to help in a problem I have with my car. Firstly I would like to apologise for the long winded post, but want to make sure I include as much information as possible to aid in the fault finding. Secondly I will admit that my mechanical knowledge is very limited and my own resources after the same (i.e. basic tools with limited spare in my garage). To start with I will give details of what I know of my car and when this problem first started, its a 1989 R32 GT-R imported by Autoworx that is in standard condition except the following;

* Nismo 240km/hr speedo

* Cat back exhaust

* Pod filters

* Twin plate clutch

* Aftermarket suspension

* Greddy boost and temperature gauge and a Delphi head up display unit.

I was heading home when I was about to turn onto a 100km zone stretch of road. I thought to myself that giving the car a bit of stick up to the speed limit won't hurt, so I gassed the pedal in 2nd gear. The revs were at roughly 5500rpm when I heard a backfire and the engine started to stall. I managed to coast the car most of the way home with the engine not wanting to exceed 2000rpm at any stage. Luckily I lived not to far from when this incident happened (1km max distance) so once I parked the car I pondered on the extent of damage I had done. The next day I cruised the car to the local servo mechanic (again only 250 metres away) were he tested the car to the best of his abilities. His limited findings were that compression in all cylinders were good and the engine oil and coolant were not fouled (meaning no blown gaskets). He said that the battery needed changing so I got that replaced straight away but other than that he had no idea about these types of cars. A certain import store with a so called GT-R specialist (which I will not defame) was recommended to me for the repair of my car, so I organised for the car to be trucked to them with details of what had happened. Anyway to make a long story short I received my car back after 9 days with the GT-R specialist saying that he doesn't know how to fix it (this is after paying a considerable amount of money for his expertise). So the car has been parked in my garage ever since awaiting repairs.

These are the known symptoms;

Engine idles smoothly but if you try to free rev it will climb to 4500rpm than just after that it will stall back to a rough idle for a few seconds before regaining a smooth idle. It is hard to tell if the turbo's are boosting but there is needle deflection from the boost gauge.

Trying to drive the car it will not exceed 2500rpm and the engine wants to stall and stutter continuously. If the battery is disconnected and all power is drained, upon reconnection the car drives as normal for a period of no more than 30 seconds.

The engine appears to be over fuelling as there is copious amounts of black soot/unburnt fuel than there was before this problem. Again there are no unusual sounds coming from the engine and the temperature remains normal.

Before all of this the car was a dream to drive with the only hiccup being a very infrequent engine stall during low speed cruising.

Here is a list of all the things that have been carried out to try and fault find the source of the problem:

* ECU code checked with nil faults found (I used the guide on this forum).

* Removed than replaced boost gauge and Head up display with nil change in performance.

* Swapped and replaced AFM's with nil change.

* Replaced and gapped spark plugs (another guide located on this forum).

* Replaced fuel pump with a new item and carried out the earth wire and positive wire mod including installing a relay (again I used a guide on this forum).

* Replaced all vacuum hoses were possible.

* Checked timing, it advances during revving until the 4000-4500rpm mark were it goes all over the place than retards itself.

* Checked all wiring at the ECU and in the engine compartment, including rearrangement of the ground wiring kit.

* Removed majority of inlet pipe work then cleaned and refitted securely.

* Removed coil packs and mega-ohm the casings to check for current leakage.

* Fiddled with the TBC to see if that was a contributing factor, as yet I am undecided due to the limited rev range.

* Disconnected exhaust at turbo's to check for no blockages in cat converter (this was done buy the GT-R specialist so I doubt its authenticity)

* Disconnected O2 sensors to confirm operation (again it was supposedly done by the GT-R expert)

* Swapped over ECU and AFM's were known serviceable items (you guessed it, done by the GT-R specialist so I have no idea if it was really carried out).

* I have even tried praying to God All Mighty, Allah, Vishnu and Buddha (not necessarily in that order) to see if any of them are just jerking my chain, but alas to no avail.

I have conversed with a member of this forum and he has suggested that it is a turbo failure. I believe that this is more then likely the end scenario but am hoping that it might be something simple I can fix (coil packs, leaking pipes or wiring that I have missed). Or if possible is there anyone in the Newcastle area willing to help in further diagnosis/repair, I would be much appreciative (i.e. offering alcohol, money or eternal praise). As the time has come when my wife is totally annoyed with the car sitting in the garage and she wants it gone. I hope to repair the car before I sell it just to take it for that last drive, but if not I will be forced to sell the car as is.

Link to comment
https://www.sau.com.au/forums/topic/215958-gt-r-engine-problem/
Share on other sites

The immediate symptoms sound like a popped cooler hose..

x2

But the latter symptoms sound like spark is being killed,

  • wether by bad coilpacks,
  • failing/wrongly gapped sparkplugs,
  • damaged electical loom (either ecu, or injector loom),
  • also there are seals that can fail allowing oil into coilpack/sparkplug housing - this one was my problem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
    • That's some really horrible design with the way it's cut/shaped! Is there much damage to the box that failed in? IE, new fork and you can go again, or is it a total rebuild again? Id be trying to build that piece from scratch, and getting some reliefs added in the corner to hopefully stop breakage, and then swapping boxes ASAP, and then doing the same to the currently good working box. I'm assuming hard shifts have not been friendly to it!
×
×
  • Create New...