Jump to content
SAU Community

Recommended Posts

Hi people on SAU,

I'm doing my first turbo upgrade and everything has gone relatively smoothly, but I need all of your help with a little problem I have come accross.

I am putting on a HKS 3037 pro s turbo kit onto my 34, and i dont know what to do with the boost lines that go upto the solenoid and i guess off to the ECU. Do I have to build these into the lines onto the hose that runs from the actuator to the compressor housing, or can i just take out the soleniod all together??? Does the ECU need that boost reading? Or was it just for the two stage boost setup on the old turbo?

I was running standard boost on my standard turbo before the upgrade, and want to run around 1.1-1.2 bar on the new one.

Any help would be much appreciated!

Cheers

is the 3037 an external gated turbo or does it use internal gate? if its external then just block the old line to the ecu and use the spring in the gate to dictate the boost.

i fits internal gate still block the lines from the olsd solenoid and use just 1 line from the gate to the plenum if i remembered right. eiether way the old solenoid isnt needed.

btw if it is internal gate worth spending some money on the hks adjustable actuator.

hope that helps you out a bit

yeah its an internal gate - the 3037 comes with the HKS adjustable actuator. Cheers for the help. if i disconnect the soleniod will the ECU chuck a mental? of will it still operate fine? I'm using a standard ECU that will be remapped in a week or two when i get it tuned.

yeah its an internal gate - the 3037 comes with the HKS adjustable actuator. Cheers for the help. if i disconnect the soleniod will the ECU chuck a mental? of will it still operate fine? I'm using a standard ECU that will be remapped in a week or two when i get it tuned.

Just disconnect the stock solenoid, it probably wouldnt really work as intended with the 3037 anyway. The ecu wont know the difference. Are you using the stock ecu?

i hope not...

yeah I will be/am. As it says in earlier posts, I will be getting it remapped in a week or two.

I will unplug the standard solenoid and see how she goes when i fire her up.

Cheers for the help

Edited by blitza

Yea just unplugg it and remove all the vaccum lines, the car will run fine without it plugged in, then just hook up a vaccum line from the hks internal wastegate to your intercooler piping, or put in a boost controller.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...