Jump to content
SAU Community

Rb20det R32 Wiring Loom And Ecu With Remap And Safc2= Rb25det Start Key And Go?..what Are The Pitfalls?


Recommended Posts

Hi there,

I just got a rb25 with no wiring loom or ecu and i want to put it into my r32, just wanting some experiances... one of the main ones is will it run with a r32 loom and remapped ecu and safc2.

I want to retain my gtr injectors on the rb25..anyone know a place where i can get a custom fuel rail??

What modifications need to be done to make the rb25det run well with r32 loom and ecu?

thanks

posted in wrong sect. before sorry.

i have a rb25 in a r32 its well worth in i have a std r33 ecu and loom if i had the chance again i would not do it this way 1k just on wiring

hmmm no plugs are different injectors, tps, afm etc etc.

i just put the rb25 block and head, manifolds and changed all the sensors over , fuel rail and injectors etc to keep the 32 rb20 ones, then got the ecu remapped and running

then starting changing injectors etc

  • 2 weeks later...

i used rb20det balancer, and steering pump...fitted up perfectly, and also used rb20det loom and comp, no worries!!... just modified the injector wires! IMO way easier than shoving a rb25 loom in and fiddling under the dash what not.

Cheers.

i used all rb20 sensors also.

I got burned with that too. I am running the following

RB25 DE head from R33 (VCT)

RB30E bottom end

RB25 injectors

RB20 CAS

RB20 ignitor

RB20 coils

RB20 temp, oil pressure, knock, start sensors

rb20 everything else.

I had to chop the top feed connectors and fit rb25 side feed ones.

I wanted to use top feed injectors but they would not fit under the plenum no matter what. even without the fuel rail they are too tall.

the whole lot is running off an R32 ecu that I have remapped. it runs like factory, returns 400kms per tank and makes 260odd rwkw.

the R32 ecu can be made to run many things.

i run a 25 with 25 loom and 32 ecu... the wiring side of things is not overly hard and takes around 2 hours to do it properly, thats everything and wipers hooked correctly so everything works.

I much prefer this rather then swapping everything over to rb20shit

In regards to injectors, i used the rb25det injector loom and plug, and made my own plug from the ecu side to fit :thumbsup: .

Edited by RaZ_TuRbO

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...