Jump to content
SAU Community

Recommended Posts

Its @ Racepace. no go :geek:

:bomb_ie: no fun i wan see the 26 in the 31

put me down as a maybe please :P as long as i can meet someone somewhere (just look out for an excel haha)

done why do you wana meet some where??

I'll be there supporting both the A Team and B Team! >_<

So put you down

I'll be there, possibly head down to shep saturday.

If we can get a few people to chip in for petty then we'll all go in ryans car....not that he knows yet.

No worries champ. the 180 will be cramped with more than 2 though.

if you all chip in enough i will enter and you can have the couch to follow me around with a trailer.

No worries champ. the 180 will be cramped with more than 2 though.

if you all chip in enough i will enter and you can have the couch to follow me around with a trailer.

My chips don't have that many zeros... We could go in my SS although the cel would be heaps better. I've never been in one.

I won't be making it to sandown to watch the morning session but will be at the BOMBARDIER CAR PARK event in the arvo. Does anyone know where this is? like address that I can look up?

EDIT: just found it on the events schedule.

im in narre and wouldnt mind goin down there wif people as i dont really know many people there. ne one wanna meet up at krispy kremes at fountain gate? and if so wat time as it starts at 9am at sandown

if i knew i could of given u a lift

well i dont think you would of wanted to drive down to the gul & then all the way back the other way but thanks anyways

dont think i would of been able to last the whole day, not feelin 100% after last night lol

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...