Jump to content
SAU Community

Recommended Posts

Lately there've been a couple threads about how mildly modded Silvias/200SXs beating GTR-Vpecs and so on, I know the GT-R isn't invincible, but stiill....guess it's fun when you have a "Brags & Stories" section.

Here's an excerpt:

"i pulled up next to a white R33 GTR at the lights. He had a APEXI front mount, exhaust and carbon bonnet.

I tried to get him to run from the lights, but he took off slow.(Prob thought he'd beat me).

Anyway, i revved my car as we took off, he looked over, i nodded at him and he smiled and nodded back.

2nd gear takeoff rolling start, as soon as we take off its me just in front. I change to third and he pulls slightly ahead(my sychnros are stuffed), as i rev out third i pull aprox 2 cars on him."

2 cars! no sh*t!:bahaha:

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

beating one wouldn't be hard as gtr's aint quik standard...i've seen light modded sr20det s13's runnin low 13's, high 12's and have also seen someone on this forums dk purple 33gtr (vspec?) run a high 13 or somethin at the plex, so maybe the guy that said he beat one wasn't full of shit...

Originally posted by pisnnissn??

beating one wouldn't be hard as gtr's aint quik standard...i've seen light modded sr20det s13's runnin low 13's, high 12's and have also seen someone on this forums dk purple 33gtr (vspec?) run a high 13 or somethin at the plex, so maybe the guy that said he beat one wasn't full of shit...

A hard launched GTR is good for mid 12's which takes an Sr20 engined car a fair bit of work to get to.

A dud launch on a GTR will give mid 13's as a lot of GTR owners don't want to abuse the clutch that much.

try a rollon in 3 rd gear and see where a SR20 near stock vs a near stock GTR is at the end....

cheers

Ken

problem is these days there are so many done up skylines that ppl can't tell the difference between gt-r and gts/gtst

especially ignorant silvia drivers :D hehehe

also the 33's are that little bit harder to tell if their guards are pumped etc etc since they have less aggressive panels than the 32's and 34's

I'd say the guy got his facts wrong and actually beat a 33gtst

Originally posted by initialD

couldnt stop laffing after reading some of those Brag story threads

funny stuff:bahaha:

with comments like:

"if GTR are such great cars why aren't they in rally?":rolleyes:

And some guy's response:

"Also yep GTRs were never meant to be rally cars, you can't just say because they have all an AWD system why aren't they in rallies? There is a hell of a lot more to rallying than just having AWD."

Correction - ATTESA System:D

why can't we all just be friends?

anyway, like kengtr said, to launch a gtr quick you need plenty of revs so they dont bog down, so if you make a halfhearted attempt you might be watching hyundai wrxs beating you

Have to agree with PSIKO that there are many GTR look-alikes.

Having said that, the smile from the Skyline owner might have also been a "yeh whatever" look and was laughing at the guy having a real go. It may also have been aknowledging a nice Nissan.

Quote from Wife: It just would not happen if I owned a GTR.

Myself I would probably just let him go as the Skyline owner did.

Enjoy!

El Bee

Originally posted by PSIKO

problem is these days there are so many done up skylines that ppl can't tell the difference between gt-r and gts/gtst

especially ignorant silvia drivers ;) hehehe

also the 33's are that little bit harder to tell if their guards are pumped etc etc since they have less aggressive panels than the 32's and 34's

I'd say the guy got his facts wrong and actually beat a 33gtst

Thats exactly what i thought ..... slap a GTR badge on my GTST and it would be difficult to tell the difference between that and a real GTR on the road.

When i was shopping for a Skyline i noticed how many GTSTs/NA's had GTR badges!!

But even if it was a real GTR there couldve been many factors why he didnt take this guy on :P .....underlying mechanical problems or the fact that he doesnt just take every car on that revs their engine beside him ..... the fact he may only have a point or two left on his license and not wanna risk it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...