Jump to content
SAU Community

Recommended Posts

The 60 is when the oil is cold and you want your oil to be think on cold start to protect the engine from wear. is more the smaller number that is inportant because that is the thickness when hot which is what your engine spends most of it's time being. If you look at what nissan suggests for our climate and they recomend 10W-30/40/50. For 5W-?? the climate they suggest for this is around 10 degree max. If i was on my computer i could post the chart up from the manual, i can do it later if people are interested.

Edited by D_stirls
The 60 is when the oil is cold and you want your oil to be think on cold start to protect the engine from wear. is more the smaller number that is inportant because that is the thickness when hot which is what your engine spends most of it's time being. If you look at what nissan suggests for our climate and they recomend 10W-30/40/50. For 5W-?? the climate they suggest for this is around 10 degree max. If i was on my computer i could post the chart up from the manual, i can do it later if people are interested.

I think you have that totally backwards.

The lower number is how the oil acts when cold (in the case of a 10-60 weight oil the oil acts as if it is a 10 weight oil (thin) when cold.

The higher number "60" reacts the same as a 60 weight oil (thick) when hot.

All engine oils get thinner when hot, so the oil will not be physically thicker when hot.

When cold you need a light oil to move from the sump to all the parts that need the oil to lubricate. In a freezing temperature climate ie Canberra in Winter 5w engine oils assist in starting the car and limiting engine wear.

Most of the engine wear on a normal car occurs at startup where there is limited lubrication.

Better re-read that chart.

I think you have that totally backwards.

The lower number is how the oil acts when cold (in the case of a 10-60 weight oil the oil acts as if it is a 10 weight oil (thin) when cold.

The higher number "60" reacts the same as a 60 weight oil (thick) when hot.

All engine oils get thinner when hot, so the oil will not be physically thicker when hot.

When cold you need a light oil to move from the sump to all the parts that need the oil to lubricate. In a freezing temperature climate ie Canberra in Winter 5w engine oils assist in starting the car and limiting engine wear.

Most of the engine wear on a normal car occurs at startup where there is limited lubrication.

Better re-read that chart.

Yep sorry i have the numbers around the wrong way;

But here's the chart;

post-27020-1209911315_thumb.jpg

The 10 or 10W is not a viscosity its a cold pouring index . So 20w50 is not 20 weight oil when its cold .

Synthetic oil is supposed to be quite "thin" when it's cold like very cold and this would be a huge advantage at start up .

Plenty of people like the Edge 10w60 but if the 60 number scares you Mobil do a synthetic 15w50 from memory .

If I was pushing a turbo engine hard and for any length of time I'd use the 10w60 too .

A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • What are you thinking makes a sequential shit to drive on the street? About the ONLY thing I can think of, is if you're wanting to be able to roll up to lights in third or second and pop it straight into neutral, or you want to come down two or three gears, say out of 5th and back to second, but they shift quick enough it doesn't really matter
    • I'm not a drag racing guy, but that was a good watch. Didn't Ibrahim's car have some cooch! But the big question is....WTF is with so many of them running without seatbelts!
    • Sequential Is fine to drive on the street
    • Well that is not a sign of good quality..  Understand, but not so nice to drive on the street I suppose and out of my price range..
    • I recently got myself a 1989 r32 GT-R and it has some slight smokiness from the exhaust and misfires sometimes when coming off the throttle. I'm looking for a good mechanic in the Brisbane region who will do a good job on it. It'll need a diagnosis, and most likely an engine rebuild with refurb/stock parts (not looking for a motorsport build... yet). If anyone has done something like this before/knows stuff about this in terms of who can do it and how much it cost, I'd like to hear about it. I was looking on the forum and I found some posts from 2020 that were similar to this, but it has been a while since then so if anyone has any updated info that would be great.  I'm also new to the forum so if this topic should be in a different place please let me know. Thanks in advance!  
×
×
  • Create New...