Jump to content
SAU Community

Recommended Posts

But only has 4 ignition drivers unless you want to get a V88.

Hopefully haltech will release more plug and play models

I do not know how the ignition outputs work but there is a plugin model for both the R33 and R34 skyline.

  • Replies 895
  • Created
  • Last Reply

Top Posters In This Topic

the plugin model runs wasted spark (two coils fire at once) i have not had any issues with this setup as of yet.

Our street/circuit GTR runs a plug-in...over 600hp (24psi) at all four and pulls harder than a one armed 15 year old with a stack of porno's.

  • 1 month later...

Hi guys, I'm using a plug in VIPEC in my R32 GTR for 3 months now and since the install there's been an intermittent problem with my Atessa which brings up the code for TPS fault. I've read a post somewhere by someone saying that this problem had happened and was possibly caused by the ECU creating a voltage drop (also with an Autronic) and the correction was a voltage buffer or some sort. Could anyone get into detail about what the fix is? I'm getting tired of losing my AWD mid corner on a hard drive and having to turn the car off to reset the Atessa..... Please help.

I'm only running 302whp at the moment but building for 500whp this winter and I can't have the chances of intermittent traction loss. Thanks guys.

Hi guys, I'm using a plug in VIPEC in my R32 GTR for 3 months now and since the install there's been an intermittent problem with my Atessa which brings up the code for TPS fault. I've read a post somewhere by someone saying that this problem had happened and was possibly caused by the ECU creating a voltage drop (also with an Autronic) and the correction was a voltage buffer or some sort. Could anyone get into detail about what the fix is? I'm getting tired of losing my AWD mid corner on a hard drive and having to turn the car off to reset the Atessa..... Please help.

I'm only running 302whp at the moment but building for 500whp this winter and I can't have the chances of intermittent traction loss. Thanks guys.

Check your TPS is correctly adjusted and tightened firmly...the plug-in boards have never had an ATESSA issue...only the V88 when running the early harness adaptor.

Check your TPS is correctly adjusted and tightened firmly...the plug-in boards have never had an ATESSA issue...only the V88 when running the early harness adaptor.

Thanks! I'll check it out. I didn't know it was only the V88. Was hoping it was any of them lol. Back to the head scratching...

Can anybody recommend a distributor that I can contact to purchase one of these ECU's from??

The distributor local to me is one that I wont go to for seperate reasons and being in TGassie makes it hard to shop around some.

I am looking for somebody who can supply an ECU with a base tune already in it so we only need to fine tune it to my car.

Would like to have this in a and running before christmas.

Can anybody recommend a distributor that I can contact to purchase one of these ECU's from??

The distributor local to me is one that I wont go to for seperate reasons and being in TGassie makes it hard to shop around some.

I am looking for somebody who can supply an ECU with a base tune already in it so we only need to fine tune it to my car.

Would like to have this in a and running before christmas.

Speak to Brett West at Adelaide Performance Engineers (Graham West Workshops) see what he can do.

I was in Burnie a few months ago, nice little town!

Can anybody recommend a distributor that I can contact to purchase one of these ECU's from??

The distributor local to me is one that I wont go to for seperate reasons and being in TGassie makes it hard to shop around some.

I am looking for somebody who can supply an ECU with a base tune already in it so we only need to fine tune it to my car.

Would like to have this in a and running before christmas.

Us southerners get shafted for dealer choice...

If Dirtman cant help, call godzilla motorsport.

  • 2 months later...

Curious to know what message do people get when they hook up their ecu to their laptop for the first time? Ie when it's asking to install the drivers? Vi-pec are sorting out an issue with my ecu, but curious to know what peoples ecu's come up as.

Curious to know what message do people get when they hook up their ecu to their laptop for the first time? Ie when it's asking to install the drivers? Vi-pec are sorting out an issue with my ecu, but curious to know what peoples ecu's come up as.

Mine says found new hardware "Link G4 Extreme"...lol

So sounds like it should recognise it as a link?

hmm mine wont connect to my laptop running vista (cant find the drivers, ive tried multiple reinstalls on the laptop), and comes up saying link electrosystems ECU, but getting a new top board from VIPEC so will see if that sorts out my issues. It connected fine with my old xp laptop, but will not work under vista. And will also will now not connect under my other laptop running xp.

So sounds like it should recognise it as a link?

hmm mine wont connect to my laptop running vista (cant find the drivers, ive tried multiple reinstalls on the laptop), and comes up saying link electrosystems ECU, but getting a new top board from VIPEC so will see if that sorts out my issues. It connected fine with my old xp laptop, but will not work under vista. And will also will now not connect under my other laptop running xp.

CeJay...my last post was supposed to be funny...sorry you missed it. Have you checked the vi-pec forum for answers?

Yes I have, and hopefully it's getting sorted, getting a replacement top board from Ray, because my ecu doesn't come up as a vipec, it comes up as a link. Was genuinely interested to see what other peoples ecu's register as.

Yes I have, and hopefully it's getting sorted, getting a replacement top board from Ray, because my ecu doesn't come up as a vipec, it comes up as a link. Was genuinely interested to see what other peoples ecu's register as.

And here i was trying to be funny and i was on the money.

We tried reflashing a Link with the Vi-pec firmware to test the theory that the hardware was the same...it didn't work. We tried flashing it back and it wouldn't work back as a Link...we killed it! Link sent us another one to replace it.

Edited by Swiper the Fox

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...