Jump to content
SAU Community

32 Gtst With Gtr Front Gaurds

MADGT4

By MADGT4,
in Exterior & Interior Styling

 Share

Recommended Posts

MADGT4 Mentor

MADGT4

Posted
Posted

Hey Guys

Just wondering who has done this and if you have do you have any pics you could possibly post up.

Im thinking about doing it to make it a shoe in for my new wheels at the front.

If anyone can help me it would be appreciated.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/218286-32-gtst-with-gtr-front-gaurds/
Share on other sites
JDM032 Experienced

JDM032

Posted
Posted

mate its simple as unbolting ur old gaurds and take them off, then bolting the new gtr ones on

the only thing u will have to change is the inner gaurd plastic, so make sure you have a gtr one first.

there is no complication to this at all, and if you know where all the bolts are located to remove the original gaurd your fine

and if you dont know where they are take your time and take the bolts you can see out first then try and move it and see where there is still a bolt or where it isnt moving and take it easy and you will get it.

to help you there are 5 or so bolts in the engine bay, 2 in the door area and one behind the indicator, and some in around the wheel arch. and u will need to move the side skirt to get to one or two aswell

i think thats it but yeh take ur time and you wil learn along the way.

pm me if you want pics on where the bolts are located.

Craved Grand Master

Craved

Posted
Posted
Hey Guys

Just wondering who has done this and if you have do you have any pics you could possibly post up.

Im thinking about doing it to make it a shoe in for my new wheels at the front.

If anyone can help me it would be appreciated.

Thanks

4dr on Ns.com

http://www.nissansilvia.com/forums/index.p...howtopic=293446

MADGT4 Mentor

MADGT4

Posted
  • Author
Posted

Rear guards are done as well which kinda defeats what im asking for... I need/want pics of 32's with GTR fronts and stock rear guards.

But thanks for the link though!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...