Jump to content
SAU Community

R33, Rb30 Conversion

Nick.

By Nick.,
in General Automotive Discussion

 Share

Recommended Posts

Nick. Community Regular

Nick.

Posted
Posted

Hi..

right, i live in vic...im about to get my first car..i really want an r33. now the non turbos hav 4 stud, and a not so nice fornt bar (imo) and the gtst is an all round beautiful car...but i cant drive 1 because its turbo. (laws in vic are bad). and if i get a gtst will save me buying new car at 23.

so i was thinking, instead of removing the turbo, why not put anon turbo rb30 in there.

now I wanna know if:- (and what work need to fit if needed)

-The engine mounts of a 30 or simmiler or same as an rb25det?

-The gear box, does it just connect it.

-what other work? how would other componants of r33 fit on to the rb30.

-VL RB best way to go?

Thanks, i apprichiate the help :) .

Thanks again, Nick

Link to comment
https://www.sau.com.au/forums/topic/218606-r33-rb30-conversion/
Share on other sites
TTT Grand Master

TTT

Posted
Posted

Buy an R32 GTST.

it's turbo

and it fits the VIC power to weight laws.

it is better than a non turbo R33 and better than an illegal engine (old 1988 engine in a 1993+ car) which the RB30 would be.

or just buy something else till you are off your P's then get the whale of your dreams.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Its illegal. You can not put a motor in a car that is older than the build date of the car.

So its RB25 or RB26 only.

Plus it then counts as a modified vehicle, also illegal.

Either way, buy a non turbo and sell in 4 years.

Nick. Community Regular

Nick.

Posted
  • Author
Posted
Its illegal. You can not put a motor in a car that is older than the build date of the car.

So its RB25 or RB26 only.

Plus it then counts as a modified vehicle, also illegal.

Either way, buy a non turbo and sell in 4 years.

coulnt you just say u just say u blew ur engine. and taht was teh cheapest thing that u could find that fitted?

Nick. Community Regular

Nick.

Posted
  • Author
Posted
Buy an R32 GTST.

it's turbo

and it fits the VIC power to weight laws.

it is better than a non turbo R33 and better than an illegal engine (old 1988 engine in a 1993+ car) which the RB30 would be.

or just buy something else till you are off your P's then get the whale of your dreams.

haha...thanks for the whale remark... :domokun:

CeJay Grand Master

CeJay

Posted
Posted
Its illegal. You can not put a motor in a car that is older than the build date of the car.

So its RB25 or RB26 only.

Plus it then counts as a modified vehicle, also illegal.

Either way, buy a non turbo and sell in 4 years.

Yeah but the rb30 came in nissan patrols newer than the skyline right? So technically the motor isn't older than the car? even if it came out of an older car.

VB- Veteran

VB-

Posted
Posted (edited)

non turbo RB30 gearbox is same as RB20DET box, so shouldnt have too much trouble getting it in, same with mounts, should be able to bolt straight up with the right mix/match combo, but then you have to wire it etc. dont f*ck around with all that, just buy a nice car you can legally drive. if you can afford to buy a GTST and do a motor swap, you can afford a non turbo supra

Edited by VB-
W0rp3D Grand Master

W0rp3D

Posted
Posted
Buy an R32 GTST.

it's turbo

and it fits the VIC power to weight laws.

it is better than a non turbo R33 and better than an illegal engine (old 1988 engine in a 1993+ car) which the RB30 would be.

or just buy something else till you are off your P's then get the whale of your dreams.

Isnt the P plate law now that you cant drive any turbo on your P's?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Yeetus
      R33 GTST Sh*tbox to Polished T*rd

      By Yeetus · Posted

      Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • GTSBoy
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By GTSBoy · Posted

      Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • ossy
      Will R33 GTR rear backing plates fit GTST?

      By ossy · Posted

      Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • Yeetus
      Has anyone put in brand new full carpet? (not floor mats)

      By Yeetus · Posted

      I also got the same floor mats for a bit of extra bazzaz haha
    • Yeetus
      Has anyone put in brand new full carpet? (not floor mats)

      By Yeetus · Posted

      Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...