Jump to content
SAU Community

Help! Will These Rims Fit My Gts?

Charles89
 Share

Recommended Posts

Charles89 Grand Master

Charles89

Posted
Posted (edited)

I've bought these ANZ 17'' multi 4 stud rims(4x100 and 4x114.3), they were on a Civic.

But I'm just wondering if it will fit my car (96 R33 GTS).

The rims are 215/45. And I've read it somewhere that the "lug size" might be different between a Honda and a Skyline, so will they fit? And can I use my current nuts for these rims?

post-40415-1210853604_thumb.jpg

Edited by Charles89
Link to comment
https://www.sau.com.au/forums/topic/219391-help-will-these-rims-fit-my-gts/
Share on other sites
bryyy Proficient

bryyy

Posted
Posted

hahaha thats precious.

dont buy wheels before you know they will fit.

4x114.3 is correct for a non turbo however, lug size has nothing to do with the wheels.

only thing of concern is offset and width - 215/45 only relates to the tyre, not the rim.

bryyy Proficient

bryyy

Posted
Posted
I have got R32 GTR's which are 9 iches without any problems.. but its a 32.. could there be that much diff?

BTW... need offsets to confirm..

If your talking about the r32 gtr wheels in your pics, they are actually 16x8 +20something (cant remember the offset)

The lower the offset the further away from the brakes/hub it will sit.

GTS4WD Grand Master

GTS4WD

Posted
Posted (edited)
If your talking about the r32 gtr wheels in your pics, they are actually 16x8 +20something (cant remember the offset)

+30

Somone was saying that 7 inch front and back was the widest you could go..

So I figure that the I figure that the 33 should be able to run just as wide rims as a 32.. considering r33 GTR rims are 8's too I dont see the problem with running 8's.. thats what i was refering too..

Can we get what model civic? Because I know some civics run ~+40 offset (in which case they will be sweet as and will sit the same as stock wheels).. unless the previous owner bought a set of rims with retarded offsets..

Edited by GTS4WD
2lord Contributor

2lord

Posted
Posted
+30

Somone was saying that 7 inch front and back was the widest you could go..

So I figure that the I figure that the 33 should be able to run just as wide rims as a 32.. considering r33 GTR rims are 8's too I dont see the problem with running 8's.. thats what i was refering too..

Can we get what model civic? Because I know some civics run ~+40 offset (in which case they will be sweet as and will sit the same as stock wheels).. unless the previous owner bought a set of rims with retarded offsets..

just so you know r32 GTR Rims are 16x8 +30 R33 Gtr Rims are 17x9 +30 and R34 Gtr Rims are 18x9+30.

R34GTFOUR Mentor

R34GTFOUR

Posted
Posted (edited)

dont buy them, 215 wide tyres are ghey, and with a rim width of only 7" you wont be able to fit much bigger later on.

keep searching, plenty on nice rims out there

EDIT: just realised you already bought them, OOPS...

Edited by R34GTFOUR
Hawker180 Proficient

Hawker180

Posted
Posted (edited)
just so you know r32 GTR Rims are 16x8 +30 R33 Gtr Rims are 17x9 +30 and R34 Gtr Rims are 18x9+30.

only one in this thread that is making any sense!

Those rims off the civic will look terrible, sunken fitments FOR THE LOSS!

If you have an R33 then you will need something with more of a negative offset for it to look any good! R33's have massive guards you will need rims at least 8" wide (+30 offset) or 9" (+35 offset)

Edited by Hawker180
bryyy Proficient

bryyy

Posted
Posted
Somone was saying that 7 inch front and back was the widest you could go..

Umm NO.

I've run 9 up front and 10's on the rear on my 32 gtst with no problems. Depends on the offset, the wider the wheel, the lower the offset needs to be.

nisskid Grand Master

nisskid

Posted
Posted

knowing the offset is vital, stock R33 wheels are 16x6.5 +45ish, being 17x7's i wouldnt recommend going any higher than +45, my guess is those wheels are between +38 and +42 so should be fine. as mentioned GTS's have small little 2-pot calipers which are easy as piss to clear, so chances are the wheel will clear them fine.

pretty simply though, fit them and find out, put them on, push them hard against the mounting surface and make sure theres no obvious fouling, tighten 2 nuts up, spin the wheel around by hand, watch for it clearing the caliper, watch for it clearing the upper control arm at the front, at the rear look out for the tie rod end for the HICAS (shouldnt be an issue for these wheels), then turn the front wheels lock to lock and check for rubbing. if this is all good drop the car and turn the wheels lock to lock and slowly drive back and forth, get someone to stay close to the wheel wells and listen for any rubbing.

Charles89 Grand Master

Charles89

Posted
  • Author
Posted

I got them fitted yesterday, it fits fine, no probs or what so ever.

and to be honest, i really don't care what people think, if its crap or looks gay.

coz at the end of the day, its my car and i like it with them on :)

heres a pic, its a little blurry:

post-40415-1211360405_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...