Devils_Advocate21 Posted May 16, 2008 Share Posted May 16, 2008 Just drop the dump check the rear of the turbo and that will rule out the turbo theory Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3872184 Share on other sites More sharing options...
lilhaulerz Posted May 16, 2008 Author Share Posted May 16, 2008 Even if the turbo bearings are gone, how can i tell by lookin at rear exhaust wheel ??? Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3872564 Share on other sites More sharing options...
Mr. Keets Posted May 16, 2008 Share Posted May 16, 2008 Dude your getting ahead of yourself. Take it to your tuner...hopefully a reliable human and not some wallet rapist, and get an opinion. Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3872605 Share on other sites More sharing options...
W0rp3D Posted May 16, 2008 Share Posted May 16, 2008 i blew my turbo, it was making a squealing noise on boost, put it back on 7psi and it lasted a good six months and every now and then i could help my self and put it back up to 12psi, didnt blow completely before i changed it. as a replacement, this is the turbo i have HERE if you can put one of these together i would higly recomend it. Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3872606 Share on other sites More sharing options...
RBwhatever Posted May 16, 2008 Share Posted May 16, 2008 (edited) sounds like the exhaust turbines lost a few blades. lilhaulerz drop the dump pipe and check the exhaust wheel. nizmonut could be on the money. Well it makes sense coming from your diagnosis......kind of. If there's anything missing off the exhaust wheel, check the cat for the bits. Edited May 16, 2008 by KeyMaker Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3872650 Share on other sites More sharing options...
lilhaulerz Posted May 17, 2008 Author Share Posted May 17, 2008 i've check everything, i dont think im gettin way ahead my self, car is now making noises from exhaust housing... replace bov , change plugs, check all cooler piping, all nutz and bolts, check if anything in intake pipe, check air filter/afm, check front wheel ( will be check the rear soon ) ... Sound is definately coming from turbo... no where else... anyone in brisbane i could go to , that not going to say every is wrong and quote me and arm and leg... ??? Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3873176 Share on other sites More sharing options...
rev210 Posted May 17, 2008 Share Posted May 17, 2008 In response to the thread title; Yes a dead ceramic turbine bits can when it shatters. As others have mentioned you are perhaps jumping to conclusions a little early go get it checked out. Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3873356 Share on other sites More sharing options...
lilhaulerz Posted May 17, 2008 Author Share Posted May 17, 2008 Oh k, by whom .... Just any mechanic ??? Im in brisbane and have been ripped off by way to many people, will not mention workshops, but does anyone recommend anyone in brisbane ??? What am i expected to pay for a diagnostic... ??? Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3873424 Share on other sites More sharing options...
monga Posted May 17, 2008 Share Posted May 17, 2008 about $900 bro, give take 600 Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3873736 Share on other sites More sharing options...
lilhaulerz Posted May 17, 2008 Author Share Posted May 17, 2008 WTF !!! $900 for diagnostic ??? or $900 for rebuild ???? If its $900 for diagnostic i rather take chance and get hiflow.. lolzz I think you meant for the rebuild right ? Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3873743 Share on other sites More sharing options...
monga Posted May 17, 2008 Share Posted May 17, 2008 900 for diagnostic bro, expect about 3400-5100 hundred for a good highflow Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3873806 Share on other sites More sharing options...
rev210 Posted May 17, 2008 Share Posted May 17, 2008 Oh k, by whom ....Just any mechanic ??? Im in brisbane and have been ripped off by way to many people, will not mention workshops, but does anyone recommend anyone in brisbane ??? What am i expected to pay for a diagnostic... ??? Then do it yourself and save some money. You only need basic tools. First check 'all' lines and clamps that are pressurised. Check the intake pipes to the turbo including the condition of the airfilter. Have a good hard look at the exhaust manifold (take off the heat shields) and inspect for leaks or tell tale broken stud. Take off the dump pipe and inspect the turbine blades, use a small mirror and a torch if necessary. This will narrow it down allot and take only a few hours at most. Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3873871 Share on other sites More sharing options...
T04GTR Posted May 17, 2008 Share Posted May 17, 2008 yeah, killed my 26, badly. turbine wheel going back up thru the manifold into 4,5,6. 40" bore out needed Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3873881 Share on other sites More sharing options...
lilhaulerz Posted May 17, 2008 Author Share Posted May 17, 2008 I have no idea where that guy gets his work done.. but 3-5k for a high flow turbo ??? wtf ??? i could get a GTRS ball bearing kit plus power fc for that money ! GCG sells hiflows for $1900 and thats an off the shelf item too ... I guess 1k for a turbo place to do one... $900 to diagnoise your car ??? hmmmzz I have done everything you mention rev210... accept for check turbine wheel ( rear wheel ) will do that tommorow....but everything else show signs it must be turbo... Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3873943 Share on other sites More sharing options...
r33cruiser Posted May 17, 2008 Share Posted May 17, 2008 just throwing this out there.. ultratune do diagnosis for $90 Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3874007 Share on other sites More sharing options...
Adriano Posted May 17, 2008 Share Posted May 17, 2008 900 for diagnostic bro, expect about 3400-5100 hundred for a good highflow Are you just trying to be a tool? Should cost about $100-150 for someone to have a look at the exhaust wheel. Is it any laggier than normal? Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3874412 Share on other sites More sharing options...
dangerman4 Posted May 17, 2008 Share Posted May 17, 2008 would it be more simple to stand a large screw driver up on the centre catridge of the turbo and stick your ear on the handle and listen. saves pulling the dump off. 10 sec diagnosis, if its noisy as hell and whirring or growling then pull the waste gate actuator off and wire the flap open so you can still drive your car. if its purring nice and smooth you can disregard the turbo as faulty. Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3874430 Share on other sites More sharing options...
lilhaulerz Posted May 18, 2008 Author Share Posted May 18, 2008 danger man can you expalin this in more detail. Could i just disconnect the metal pipe/piece that runs to the flat off and wire it open ? instead of removing the whole actuator ??? Doing this is so i dont build boost? but the turbine wheel still be spinning still rite ??? So same thing as driving off boost ??? Just a question.. Thanks for the idea bro... Buying a blown rb25 turbo today, and taking it to MTQ Salibury ... What do i tell them to do with it, " Hey mate, can you high flow this " .... Do i need specs of what they should hi-flow it to.. Or they should know what to do... I got like a 1k budget... so hoping its not too exxy If it is.. gotta wait a month Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3874809 Share on other sites More sharing options...
dangerman4 Posted May 18, 2008 Share Posted May 18, 2008 disconecting the waste gate actuator and wiring open the gate will help stop the turbo creating boost as long as you stay below 3.5k rpm, so will help you get from a to b without causing exessive force on the turbo if it is infact damaged or faulty. but first things first. start the car and use a long screw drive as a stethiscope. if you have a stuffed bearing, or impeller you will be able to here it thru the handle of the screwdriver. Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3874894 Share on other sites More sharing options...
lilhaulerz Posted May 18, 2008 Author Share Posted May 18, 2008 I did the screw driver thing, and get like a vacumn cleaner sound.. whiiirrrrl whiirrrrrl whiiiirllll .... like that... but with a deeper note... What exactly am i listening for ? Link to comment https://www.sau.com.au/forums/topic/219464-is-it-true-a-blown-turbo-can-also-cause-engine-damage/page/2/#findComment-3875120 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now