Jump to content
SAU Community

Recommended Posts

3 is nothing

knock is the engine pinging or detonating etc...

the factory warning is set at 60, which is when the check engine light will flash on the dash...anything up to about 30 is ok. If it starts hitting over 30 you might want to get your tuner to look at the tune...

yeah. The mic can often pic up vibrations (not in the engine) and register high, keep driving and see if it's a once in a while thing or a common happening, if the later go see your tuner.

i got mine tuned by matty spry.

usually max knock i see is 18.

BUT when i redline it or go a tad over redline it shoots up to 60+...and the warning lite goes off, because he set it that way.

now he said "when u reach the redline or go over it the knock will shoot up. ignore it. its normal"

is THIS true?

The old knock reading mines been up to 133 & gets up to about 60 everyday but had ears on it with a knock detector & we hear nothing so yeah mine might registering my dog box or something else so i wouldnt worry about 3 lol. On start up knock may read a little high.

every time i hit limiter knock reads anywhere from 70 - 120. i try to stay off the limiter. Yes it is normal

i got mine tuned by matty spry.

usually max knock i see is 18.

BUT when i redline it or go a tad over redline it shoots up to 60+...and the warning lite goes off, because he set it that way.

now he said "when u reach the redline or go over it the knock will shoot up. ignore it. its normal"

is THIS true?

go near red line in 4th or actually hit the limiter?

maybe the air is getting too hot and it is detonating a bit.

If your hitting the limiter ignore all knock readings from the limiter. remember stock limiter is 6900rpm.

go near red line in 4th or actually hit the limiter?

maybe the air is getting too hot and it is detonating a bit.

If your hitting the limiter ignore all knock readings from the limiter. remember stock limiter is 6900rpm.

when i reach limiter man. ahhh, well my limiter is set to 7300. that might be the problem. i will just need to hold back.

Hey guys, i wanted to set the rev cut to 7500 on mine, currently its at 8000.....how can i set it to 7500 on my hand commander, my tuner told me its really easy and somethingi can set up myself.

Also, i didnt know what it was set at before, and i was driving it hard once, and the car kind of jerked really badly (after going high reves, possible over 8000), was that my rev cut doing this, is it safe to hit rev cut...i guess its better than going over the rev i guess.......

Thanks:)

go to settings, then scroll to the last option which is rev. then hit the right arrow so the revs are highlighted then hit down arrow till it's down to what you want. then just hit back and go back to monitor mode or whatever you normally leave it in.

My Mates r33 would contantly register about 80knock on hard driving, the tune was spot on and great. Had a look in his engine bay and his sway bar had a massive dent in it from the intake hitting it, removed it and on full thrash he registered knock of 30. Big change.\

Knock is recorded as any metallic sound as in metal hitting metal, 3 is nothing.

Story pointless just a lil fyi

Edited by DECIM8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...