Jump to content
SAU Community

Recommended Posts

You'll need a heat gun/hair dryer and a blade. Something like an emo blade, then heat and slice/carve away...

I've read a few stories of people trying to remove tint themselves and they've all recommended others to get it professionally done. Only $80 or so anyway.

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3887375
Share on other sites

i did mine my self

yes it can be a bitch but why pay some one money to do it when you can do it your self

as long as ur not a drop kick you'll be fine

i just ripped the tint off and used hot soapy water and sharp emo blades lol to get the glue off

it does take time but so what

and apparently there is this spray u can buy which you just spray on to the sticky stuff and u just wipe it off but i couldnt find it any where

hope this helps

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3887516
Share on other sites

i thougth it was ok to have darker tint on the back and rear quarts. its just the drivers and passengers that have to be legal

A topic about tint came up in the Vic section a few months back and it's only legal to have the rear quarter windows dark. So pretty much the windows that the driver need to look through to drive can't be darker than 30% (I forget the exact number :D ).

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3889081
Share on other sites

Easy!! Done it many times! all you need to do is peel the tint off and you will notice the sticky gluish residue on the window. this part is the bitch part. all you need is a spray bottle with water or window cleaner in it and a razor blade with a handle and start spraying and scraping away. it may take time but unless u want to pay someone to do it its gonna take alot more time to get your car checked.

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3889382
Share on other sites

i did mine my self

yes it can be a bitch but why pay some one money to do it when you can do it your self

as long as ur not a drop kick you'll be fine

i just ripped the tint off and used hot soapy water and sharp emo blades lol to get the glue off

it does take time but so what

and apparently there is this spray u can buy which you just spray on to the sticky stuff and u just wipe it off but i couldnt find it any where

hope this helps

Time is money.

If its going to take me 3-4 hours of time, and fiddly at that

For $80, its money well spent and lets one do other things.

Fair enough if you sit @ home all the time and dont work/leave the house etc... DIY probably would be worth while... include purchasing blades, cleaners etc knock another $10-$15 off the price off someone with the tools doing it

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3890285
Share on other sites

Hey thanks for the insight lads. I may just get someone do to it properly as time is quite tight at the moment.

Also, While failing me for tint they also got me for the child restraint brackets. They are in the middle of the speaker and "should" be in front of it. WTF do i do to fix that??

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3893307
Share on other sites

If your car has been complied by an authorized workshop you will have no trouble passing with those child restraints where they are.

The fact the cops even picked on you for that is stupid. The workshop has all the certs/tests etc required to say that they are effective where they are.

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3893315
Share on other sites

i thougth it was ok to have darker tint on the back and rear quarts. its just the drivers and passengers that have to be legal

It's all respective of the state you live in....

For NSW, the law is the rear windows and windscreen can be as dark as 5% tint, with NO tint on the front side windows, and only the top 10% of the front windscreen tinted as well (For business vehicles and taxis)

Or

All windows no darker than 35% tinting all around, but only the top 10% of the front windscreen tinted (for business vehicles, and taxi's).

For passenger cars, the NSW rules are no darker than 35% tint all around, and only the top 10% of the windscreen tinted.

This can be different for other states, and thus you need to check your local area.

As for the 2 defect issues, There is a spray you can get to break down the tinting glue, call up a local tinter and ask them the best thing to remove tint before you take it to them for re-tinting (if you take it or not is not their business, but if they think your making their life easier, it will help you get the information).

As for the restraints, they will be checked off on your compliance stickers.

Something everyone needs to remember is that a Police officer's "defect list" is not an actual list of defects on the vehicle, but a list of the things he believes should be checked by someone that knows the ADR requirements, and regulations of the local area. For a cop to ping you for stuff like this, either he didn't get his coffee and doughnut, or you didn't pass his personality test.

For an example, yesterday I took a highway patrol officer for a drive in my car, because he had never been inside a Skyline GTR in a 'civil' environment (off duty). He pointed out the lack of H-pattern on the gear lever (can place a sticker within 10cm of the gear lever to comply in NSW), and the twin POD filters under the bonnet, but other than those things, he said unless I really upset the officer, I would be sweet with.

He also mentioned a simple cover on the PODs will not surfice, as the legal requirement for NSW is a SEALED enclosuer for the pod filters.

Personally, I have heard mixed 'stories' about the child restraints, from rear speakers removed and restraint clips fitted, to restraint clips fitted stock BEHIND the speaker grills, but this is still debatable, and should be covered under the compliance of the imported car.

Good lock with everything.

B.

Link to comment
https://www.sau.com.au/forums/topic/220402-removing-tint/#findComment-3893356
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
    • Did some FASTing ...got the impression that the actual part# was a moot point ; seems all of these hardlines for coolant are discontinued/NLA... like, I take it you're after the hardline that bolts onto to the manifold...that's NLA according to amayama & nengun .... ...just to clear up some confusion, they typically mounted the AAC valve to the intake manifold somewhere near a coolant passage, so the body of the valve heats up & holds it open when engine's up to temp - no coolant flows through the valve, it's a mechanical, thermal connection.
×
×
  • Create New...