Jump to content
SAU Community

R34 Non-turbo - Slotted Vs Non-slotted

iseekool
 Share

Recommended Posts

iseekool Veteran

iseekool

Posted
Posted

Hi all,

I have an r34 sedan non-turbo (not using turbo brakes like in the GT-V).

My rotors are in need of being replaced soon and I'm tossing up between slotted rotors or just the plain (genuine) ventilated rotors. I want to know if it is worth spending extra for the slotted rotors (DBA 4000 series) or if I'm just wasting my hard earned $$$. I'm intending to do all 4 corners. I mainly do city/freeway driving, on the odd occassion i take my car out to the Black Spur or the Great Ocean road for some fun (guys in Victoria would know these places :P )

Also wondering if there is a difference on the life of the rotor (slotted vs plain).

What are the recommended pads to go with the rotors? I was thinking bendix ulimates or would these be too harsh on rotors...

br3ndan Mentor

br3ndan

Posted
Posted

If your going to the trouble of changing the rotors, i would just put in slotted...

You really only need them in the front... however it does look better if you do all 4, and not just 2.

I dont think they are that much more from memory...

Just dont get the ones with the holes in them... augmented i think they are called, as disc around the holes tend to get fine line cracks due to rapid heating and cooling.

so ya +1 for slotted!

NA_Goodness Grand Master

NA_Goodness

Posted
Posted

There are 4 types. Plain (no grooves or holes), slotted (grooves), drilled (holes) and slotted and drilled (obvious, isnt it?)

Slotted wear your pads down a lot more, but drilled are more prone to cracking. However, the drilled do allow for more venting, so they do serve a purpose

scathing Grand Master

scathing

Posted
Posted

DBAs have a reputation for cracking, even their slotted rotors. I think most of the people doing it are doing it on the track though.

If you're only doing GOR and the Spurs you should be OK. I would assume, and hope, that you're not pushing your car to the limit on either road and overheating your braking hardware. There's not much margin of error available on either road, and with GOR especially help can be very far away.

iseekool Veteran

iseekool

Posted
  • Author
Posted
DBAs have a reputation for cracking, even their slotted rotors. I think most of the people doing it are doing it on the track though.

If you're only doing GOR and the Spurs you should be OK. I would assume, and hope, that you're not pushing your car to the limit on either road and overheating your braking hardware. There's not much margin of error available on either road, and with GOR especially help can be very far away.

Thanks for the tip about the rotors cracking - its got me thinking :)

I try to be gentle on the brakes where i can by using a lower gear.

I wonder if anyone else here has experienced cracking fo non-track use?

  • 2 weeks later...
iseekool Veteran

iseekool

Posted
  • Author
Posted

Thanks for the tips guys. I've bitten the bullet and going for DBA slotted "4000 series" up front and DBA slotted "street series" for the rear. They are on order, I'll update you guys on what I think of them.

slaughter Community Regular

slaughter

Posted
Posted

get slotted and drilled mate look so much better and a lot better performance, you will not have any dramas with them cracking unless your thinking about drifting or track days ?(unlikely being n/a)

You can also get them cryo dipped (ask your brake specialist about this)

+1 Slotted and Drilled (countersunk)

Julz89 Community Regular

Julz89

Posted
Posted

i havnt really heard much of a difference between the 2 unless u doin some serious racing but my point of view standered ventalated is arite. plus now brake pads dont use aspesdos anymore they use fine metal particals in the brake pad so rotars dont last as long as they used 2. slotted do look better if u got money go for it if not just go normal cause rotars some are luky to last 80000km.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...