Jump to content
SAU Community

Recommended Posts

anyone got a engine hoist i can borrow,dont need straight away but may need to borrow for couple days to get motor out,then may need to borrow again for a couple weeks after that to put motor back in,got conrod to change on piston after motor cracked the shits other day

pm me if anyone can help in any way

still looking for a hoist anyone

im just after a water line for the stock turbo from the block on a series 2 r33. i have a new turbo and need to get a line made up for it, dont wanna go through the hassle of taking it off and being without the car for too long.

any help would be much appreciated!!

hey peeps i was wondering if anyone has a stock intercooler and uncut reo bar for an R33 S2 gts-t that i could borrow to get off of defect

you shouldnt need a stock intercooler. i went through regency with my fmic and it was fine.

you shouldnt need a stock intercooler. i went through regency with my fmic and it was fine.

to leave my intercooler meens i have a cut reo bar its the only way it fits so i need a stock one so i dont have a cut reo bar

um???? didnt even know i didnt have one... and they didnt check, mate went through with a cut one and they didnt check.. and we both had coolers.

the dude must have had a bad day just b4 i got there then

Looking to borrow a set of Stock rear struts to suit a R32 GTR for an ispection in 3 weeks, will only need them for a couple of days.

The back of my muffler hangs 15 mm to low and the shocks in there are stuffed as the previous owner has butchered them.

Preferably in the southern suburbs

can anyone please brighten up my day and lend me any of the following..

-stock r33 suspension

-stock smic

-series 2 r33 reo bar

-stock r33 skyline wheels with tyres

it would be much appreciated.

Edited by Nozila

got shocks and smic with piping got cusco springs not sure how low they are tho. might be putting them in mine this weekend? so if i do i will have spare stock springs aswell got stockies tread i think is legal but not 100% sure

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...