Jump to content
SAU Community

Recommended Posts

http://www.xspeed.com.au/manuals.php

Any of these the correct one? Try googling more, there seems to be a fair bit on the net.

hey mate,

yeah ive looked the xspeed manuals - they have pretty much every one except the one i have!

Ive been googling for 4 hours :dry:

all sorted, worked it out in my lunch hour 2day! made 199.48rwkw at 11.5 - 12lbs

Good stuff! Would it be worth making a thread about what you did incase someone else has one and hasnt a clue? :P

Got a stock R33 exhaust for rent in sydney if anyone needs one and also know a place where they wuld put it on and take it off for $350 cheapest place i found so far.

uhhh

i dont think anyones keen to drive 1400km's for a stock exhaust and then 1400km back...

and for $350?

ill do it for a six pack

Edited by DamageInc
Has anyone got a set of R33 gtr wheels with brand new tyres that I can borrow to get car through regency. Aparently I need new tyres for first time rego.

if you get stuck, ive got my 33R wheels shod with R888s that have only had the one track day done on them, and they're in the stock size (255/40/17)

if you get stuck, ive got my 33R wheels shod with R888s that have only had the one track day done on them, and they're in the stock size (255/40/17)

Thanks mate I might see if they will fit first and then maybe think about fitting tyres. Unless your planing to put new ones on. I could help out abit. I hope they will fit over 360mm rotors. Could you do us a favour and measure the inside diameter. I might have to try sinergy for there set of compliance wheels.

Ill let you know monday Vince from import compliance is trying to get a set aswell. He wants my car out of the workshop as much as I do

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...