Jump to content
SAU Community

Recommended Posts

that site wasnt rely helpful i know what to do after i have taken the snorkel off afm etc i just dont no how or what to do with the two pipes connected to the snorkal.... as you said one is the bov so do i block that??

that site wasnt rely helpful i know what to do after i have taken the snorkel off afm etc i just dont no how or what to do with the two pipes connected to the snorkal.... as you said one is the bov so do i block that??

block the bov hose and leave the breather atmo. if you block the breather you will end up with ventilation problems.

block the bov hose and leave the breather atmo. if you block the breather you will end up with ventilation problems.

ok thanks for all your help and sugestions...i just dont want anything to stuff up now if i do it...cheers

:laughing-smiley-014:

so... you want to pull the air filter, AFM and pipe off totally? you gotta be taking this piss right?

if you're serious about it... then give yourself an uppercut

why? not like iam the only one doing it....all the vl's have it and heaps of skylines??? please explain?

i'm sorry mate, but this "I want tututututututuuuu" topic has run it's course. people have told you how to do it and from here this thing will only degenerate further into a thread of people wanting to bag you out. if you still are not confident doing this kind of stuff take it to a workshop and tell them what you want.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...