Jump to content
SAU Community

Recommended Posts

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Yo, man. My GTT is basically a RWD GTR.

600rwhp with a RB26DETT transformed to a RB27DET and a GTR tranny mounted underneath.

I NEEDED the MFD to monitor my car's vitals signs so I can help avoid trips to the Skyline doctor.

  • 1 year later...

Lol he be mad because he's only got a 32 and this swap won't work for him.

so... I have a R31 and I am about to go full custom with one of these.

question as well. I see a tach input on this - can I get a TACH gauge up on this unit at all?

I have pulled the tach out of my dash to put this display in place.

(and 2yr thread bump ~ !~)

Lol actually thinking of putting one in my ralliart colt, but so many better aftermarket options out there.

Oh good to see u still around chris.

yep still around , still screwing with old nissans..

Chris, There is no way to show RPM on the unit itself. The RPM input is used to trigger (at a desired point) the REV shift light on the unit. Let me know if you have any questions as I have just finished installing one of these (properly) into my GTT.

got this one on the bench and went looking. looks like I lost the tach in my car. its auto and no biggie.

progess shots: (reverse engineering the switches and video display at that point.)

1098176_10201795206065101_1210220218_n.j

anyone have an exact translation of the G sensor pinouts. I have the HK PDF but the pinuts for brown 25.26.28.29.38.39.40.44 are VERY vague as to function.

Chris, see attached image file. I copied this right from the Nissan R34 GTR Supplemental Manual. It has all the trouble shooting stuff and pinout for the MFD. Maybe it makes more sense than the HK translated one to you.

post-89402-0-57983300-1375884421_thumb.jpg

  • 8 months later...

Hi everyone,

I' settling the nismo upgrade on my GTT's MFD.

Does someone know how to install the exhaust sensor?

I mean like a tutorial of the set up?

Do I need to drill a hole or buying a v-spec pipe for example?

Thanks for the reply,

Oh if it could help, I have the Japanese manual and if needed I can take some picture of the two different board side to side while I will install it.

Really it wouldn't be worth it to go and find a V-Spec pipe to install the sensor, and it's not like it would just fit if you did get one.

1. Drill hole pre-cat but away from turbo dump (i installed mine 2cm before cat).

2. Weld bung in to accommodate sensor.

3. Screw sensor in and run wiring up through floor grommet under passenger seat.

4. Terminate 1 sensor wire to eyelet and bolt/screw to floor pan under seat.

5. Extend other sensor wire (it doesn't matter which), to the MFD display neatly and connect to exh. temp. sensor pin.

Don't forget to reinitialize the unit after start up to detect the sensor (and inter-cooler sensor if your installing that too). Although i guess you have to do that anyway since your installing the Nismo board.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
    • Yeah I also looked at Plazmaman, but, it ended up alot  cheaper getting black ones through EFI when you also added in the delivery cost
    • Nice shot! They look super clean. The roof rack delete on the black one is interesting. Would like to see more pictures from different angles. It's subtle but could make quite a difference to how the car looks in profile.
×
×
  • Create New...