Jump to content
SAU Community

Recommended Posts

If they get you to do an emissions test its easy, otherwise on visual inspection i think its pretty hard.

But my thoughts are dont do it. A good 3" cat will flow well and is legal. Some things we cant avoid like running re-written ECUs and aftermarket ECUs.

Then there is the shady topic of legaility concerning BOVs/Filters/Intercooler etc etc, but one thing we can do is run cats on our road cars.

Link to comment
https://www.sau.com.au/forums/topic/22109-cats/#findComment-472834
Share on other sites

Guest INASNT
Originally posted by akeenan

you can put a straight pipe where the cat is and the shell of the cat round the pipe and make it look authentic.

when u go for a epa test they stick a probe near the cat and can tell if its working properly.

But think about it would u rather have that extra 5kw or be able to breath clean air???

Link to comment
https://www.sau.com.au/forums/topic/22109-cats/#findComment-473008
Share on other sites

i had a cat-out pipe for a while. It will spool the turbo faster, but doesn't really do much for emissions. You are likely to only gain about 2-5rwkW so bugger it. And a gutted cat will likely flow worse than a hi-flow and hence make less power; as has been said it slows the velocity of the exhaust and causes more turbulence around the empty cat.

Just get a highflow from BATMBL and be done with it - i have and am very happy with it.

Link to comment
https://www.sau.com.au/forums/topic/22109-cats/#findComment-474070
Share on other sites

Dunno about the cops, but I reckon the RSPCA would be onto you.....

seriously though, Why do it? its cheaper than a high flow cat, granted, but I doubt there would even be a noticeable increase over a healthy cat convertor. A clogged one would be a restriction though, but a healthy, fresh one , in a decent size, would be a negligible benefit

Link to comment
https://www.sau.com.au/forums/topic/22109-cats/#findComment-474336
Share on other sites

My motorcycle didn't come with a cat, and it's not legally required to have one on there. I don't actually know why, because the bike requires premium (toxic) fuel as well, so in theory it should have come with a cat. Strange.

Link to comment
https://www.sau.com.au/forums/topic/22109-cats/#findComment-475438
Share on other sites

Cats do fit on bikes. The current model VFR800 has one for a couple of years now (since 2001 I think) and it fits well enough (just smaller than a car one). A few other models have them too, like the Gold Wing.

In California I think all new motorcycles are required to have them. A trend that will probably follow elsewhere.

Link to comment
https://www.sau.com.au/forums/topic/22109-cats/#findComment-475913
Share on other sites

I actually wonder what happened to the old rotten egg gas smell that unleaded cars used to get. It doesn't seem to happen anymore. They must have removed a lot of sulfur from fuels.

As for motorcycle cats, I think as long as the general population and the politicians remain ignorant as to just how polluting motorcycles are (especially 2 strokes) then we won't be forced to put them on just yet :P

Link to comment
https://www.sau.com.au/forums/topic/22109-cats/#findComment-475941
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...