Jump to content
SAU Community

Recommended Posts

What parts should be changed when rebuilding a motor to run at the stock 7psi? I just want it to run well seeing how it has over 150k on the motor, I searched but only found engine builds that will have monster hp, I just want to get mine running smoothly and reliable before adding more expensive parts for more power

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/
Share on other sites

if its just to run 7psi, and it only has 150k on it i wouldnt bother, just keep saving your money for a proper rebuild if you plan to do it.

some items you MIGHT want to replace though, gaskets, hoses, piston rings, make sure your valves are sealing and arnt carbon'd up.

how far down the track did you want to put more power into the engine? what engine?

how much money were you wanting to spend on this engine build (refresh)??

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3907562
Share on other sites

Sorry, rb26dett, Im getting the car next week(cant wait!) and I dont want anything to happen to it in the first month of driving it. well in the future my goal is 450-500whp. mostly for weekend driving and the track for fun

well it says 150k, and could of been driven really hard, not taken care of and rolled back too

Edited by DosuGTR
Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3907906
Share on other sites

well when you get it, change plugs, fuel filter, have a look at the brakes, check all suspenion bushes. just give the car a good check over in general, if the majority of things look good then you should be fine.

dont thrash it stupidly and itl last for a while. but since ur only just getting it...you'l thrash it haha.

just see how it feels and looks before you start organising a rebuild. 26builds arnt cheap...

where are you located?

CJ

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3908588
Share on other sites

Sorry, rb26dett, Im getting the car next week(cant wait!) and I dont want anything to happen to it in the first month of driving it. well in the future my goal is 450-500whp. mostly for weekend driving and the track for fun

well it says 150k, and could of been driven really hard, not taken care of and rolled back too

So you want to rebuild it once to suit 7psi and basic power, and then rebuild it again later for 450-500rwhp?

You obviously don't know how much the labour/machining/necessary parts costs for a rebuild... it's BIG money.

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909087
Share on other sites

So you want to rebuild it once to suit 7psi and basic power, and then rebuild it again later for 450-500rwhp?

You obviously don't know how much the labour/machining/necessary parts costs for a rebuild... it's BIG money.

sorry mate but he's right. engine rebuilds are only if you need it. your gonna need your cash for everything that breaks down on them. keep a stash for when that happens

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909333
Share on other sites

have you had a GTR before? realize how much power they have stock? you can easily get 300awkw out of a GTR with simple cheap and easy mods like exhaust turbos and boost. if its got the 150,000 on it then maybe it already has had the pumps replaced. you would find it a lot cheaper to do a 100000km service then to rebuild the whole motor

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909338
Share on other sites

well in that case, maybe you are better off replacing the brakes and rotors, new suspension. while you are there, replace the bushes.

the interior would be on the way out by now as well, so order new plastics, seats and carpets.

seals around the windows are getting a bit weary, and you don't want them blowing out while you are doing a 300kmh plus pass down to the local shops, so replace them, along with basically anything else that is over 12 months old...

maybe just buy a new gtr...?

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909624
Share on other sites

Well I figured alot of these imported skylines were beaten on so its better safe than sorry

Dude, if the WORST happens and your motor lets go, you'll be up for a minimum $6000 rebuild (incl. labour, but mostly stock parts).

If you want to make sure that doesn't happen, you're up for a minimum $6000 rebuild (incl. labour, but mostly stock parts).

Safe = $6k, Sorry = $6k.

There is no point in doing what you're saying. You're better off changing the oil ever 1500kms like most do and hoping it doesn't spin a bearing (good luck!).

If you want to be assured your car wont break down in the first few months of ownership, don't buy a GT-R.

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909652
Share on other sites

If you want to be assured your car wont break down in the first few months of ownership, don't buy a GT-R.

Or buy one with an already rebuilt motor, or buy one with a popped stocker motor with the plan to rebuild it. No gambling this way, know what you are getting.

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909700
Share on other sites

yeah just go with it for now. main thing is to give it a good service (eg all new fluids - there are a lot in a gtr.....) and don't turn the boost over say 12-14psi. You should be fine, and if not you are in for that rebuild anyway :blink:

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3910330
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...