Jump to content
SAU Community

Recommended Posts

Hey all,

Currently i'm in the process of upgrading my suspension on my 33 gtst. I have some coilovers coming in but i'm curious about what i should do on the replacement bushes front.

I like to try and do as much as possible myself....but am i wasting my time putting all the bushes and suspension on myself to then have it properly aligned by pros? should i just get them to do the installation if they are going to end up changing a lot of my initial work anyway!? I am always keen to learn but i don't have money to just throw at workshops asking megabucks per hour. (I got a quote from one of the respected melbourne workshops for $1000+ for the install & alignment)

Cheers

Camden

Link to comment
https://www.sau.com.au/forums/topic/222051-suspension-install/
Share on other sites

When you consider most of that $1000 is the install, it makes sense to try and do it yourself.

The job is relatively easy, with only a few spanners / sockets required. The alignment will not be so far out that it will be a problem then to drive the car to the workshop for an alignment check.

When you consider most of that $1000 is the install, it makes sense to try and do it yourself.

The job is relatively easy, with only a few spanners / sockets required. The alignment will not be so far out that it will be a problem then to drive the car to the workshop for an alignment check.

If i do go down the full bush replacement path then it does seem to add up tho. The full SuperPro bush kit was like $900 on its own (from bursons or repco cant remember which now)... although i do know its a little cheaper to go the whiteline path.

If I don't get broked bushes swapped they will just chuck the coilovers in for $250....

Cheers

Camden

If i do go down the full bush replacement path then it does seem to add up tho. The full SuperPro bush kit was like $900 on its own (from bursons or repco cant remember which now)... although i do know its a little cheaper to go the whiteline path.

If I don't get broked bushes swapped they will just chuck the coilovers in for $250....

Cheers

Camden

So that workshop is going to charge you $250 just to install your coilovers???? That's a little steep imo.

So that workshop is going to charge you $250 just to install your coilovers???? That's a little steep imo.

Correct. Allignment too, but no replacement on bushes.

I guess in truth i do want to do it myself but i'm not interested in paying how much superpro expect for the replacement bushes. unfortunately pedders only make a couple bushes for r33's (sway bars and control arms i think) I haven't called whiteline so see what kind of price there full combo is yet...

Cheers

Camden

its roughly $50 per end so $200ish + allignment so it sounds about right. you can do it yourself if its just coilovers, I did and just pay for the alignment. doing the whole bush thing is another story as some of them need a pressing machine and a bit of labour hence the cost. you will need camber kits at least if your going lower than stock ride.

A good shop will look over your car and tell you if you need to replace them or not. most of the time you dont need to.

have a look at sydney kids suspension group buy. might save you a couple bucks

its roughly $50 per end so $200ish + allignment so it sounds about right. you can do it yourself if its just coilovers, I did and just pay for the alignment. doing the whole bush thing is another story as some of them need a pressing machine and a bit of labour hence the cost. you will need camber kits at least if your going lower than stock ride.

A good shop will look over your car and tell you if you need to replace them or not. most of the time you dont need to.

have a look at sydney kids suspension group buy. might save you a couple bucks

Pressing machine ain't a problem, i have the technology at my disposal.

SK's group buy might be a good move as i'll prolly put in some adjustable sways at the same time. Does anyone know if you get new bushes with the sways because according to whitelines catalog they don't have a listing for them (the bushes that is)

Cheers

Camden

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...