Jump to content
SAU Community

Recommended Posts

Hi guys.

I had my stagea on dyno yesterday, i put on at bigger turbo, a T70, and adjusted til fuel to 1,4 bar.

On the dyno the boost was only at 1,33 bars, but it still made 485,5 rwhp at 7200 rpm, and 484 nm at 5800 rpm.

As you can see on the attached fil of effect, there is a lot more power in this turbo, and it have the same nm all the ways, in this weekend, i will try more then 1,6 bar.

Link to video:

http://www.jorn-petersen.dk/e107/e107_files/Video/00187.wmv

And a picture of a warm turbo, and the dyno result.

post-46420-1212559297_thumb.jpg

post-46420-1212559452_thumb.jpg

Edited by Stagea Denmark
Link to comment
https://www.sau.com.au/forums/topic/222301-danish-stagea-on-dyno-again/
Share on other sites

Hi guys.

I had my stagea on dyno yesterday, i put on at bigger turbo, a T70, and adjusted til fuel to 1,4 bar.

On the dyno the boost was only at 1,33 bars, but it still made 485,5 rwhp at 7200 rpm, and 484 nm at 5800 rpm.

As you can see on the attached fil of effect, there is a lot more power in this turbo, and it have the same nm all the ways, in this weekend, i will try more then 1,6 bar.

Link to video:

http://www.jorn-petersen.dk/e107/e107_files/Video/00187.wmv

And a picture of a warm turbo, and the dyno result.

It appears that this is turning in to one evil car...........it will be good to see a 1/4 mile time when you can...

doesnt really get on the boil till over 5500 approx rpm .. is the car mostly for street use?

Thanks.

This car is only for street use, and some fun.

I this weekend, we have Danish Nationals, and i will go on the drag-strip, and smoke some tires with a friend, he have a 650 hp Supra, we will together smoke the track, all 402 meters, to warm up the spectators, my brother will record it on video, and i will post it here.

It appears that this is turning in to one evil car...........it will be good to see a 1/4 mile time when you can...

It will happen this weekend, i hope for at low 12, and with a boost at 1,6 bar, that will be arround 550 rwhp.

Remember, nothing insite the engine is changed, standard cams, bolts, gaskets, this engine is only a test, because there is a lot off smartguys in Denmark, telling me, i can't make more then 450 hp out of a standard RB25DET engine, i will show them. :P

Thanks m8, anyone know, how much i can make out of a standard RB25 engine, before i blow.!!

There is an 18 page thread in the DIY section (max power from RB25DET) where someone went through this exercise. The answer is the sky's the limit as to what you can acheive on the dyno but you are already above what can normally be sustained for any length of time. However as you appear to have the resources to find out for yourself...good on you.

There is an 18 page thread in the DIY section (max power from RB25DET) where someone went through this exercise. The answer is the sky's the limit as to what you can acheive on the dyno but you are already above what can normally be sustained for any length of time. However as you appear to have the resources to find out for yourself...good on you.

Thanks.

Engine blown.

Long story, but was to Danish Nationls this weekend, and my car was in a show-class, smoking tires, 402 m, ect.

Before all runs, i was on the dyno at this event, 1,33 bar, 488 rwhp, at all these runs, i made 1,42 bars boost.

The first 4-5 402m runs, i mad 13,4 - 13,5:

Reaction times between 0.28 and 0.33.

60 foot: 2,6 to 2,75 every time < Bad Launch-control, and street-tires.

At 200m: 147 km/t.

At 402m: 189 km/t.

But at every run, and at approx 370m, i had to shift to 4. gear, and my max. rpm was at this time at 7800 rpm, i changed this to 8500 rpm, and hope i now was able to go all the way in 3. gear, lower the rpm in the launch-control to 3200 rpm, and made another run, i got a better start, and at approx 390m, i was at 8500 rpm, i didn't shift to 4. gear, pedal to the metal, stayed there, and piston number 5 or 6. was dead, a lot of smoke from the engine room, shit happens.

I will add a video or 2 soon.

I put in a new engine in 2 days, still a standard engine, my new goal is 600 rwhp this time, but i will only make 7800 rpm.. :)

A very nice weekend, the winner in street-class, was a EVO 9, 9,51 sec.

Edited by Stagea Denmark
Please tell me someone took video footage of some of that....??

I don't have a video, where my engine goes kaput, but other.

On this video i made a 13,55, and 172 km/h, missed 4. gear, beat a Skyline GTS. (11 MB)

http://www.jorn-petersen.dk/e107/e107_files/Video/00270.wmv

shit be interested in seeing how the block went as when mine blew it cracked big time . mine had 255awk but a bad night and a massive boost spike due to a waste gate line comming addrift . all ended broke 2 ringlands and cracked 2 other pistons as well as the block cracking so sad .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...