Jump to content
SAU Community

Recommended Posts

complete waste of time. they car is only fit for a japanese junkyard mate. and there are a lot of costs associate with shipping. it does not 'cost one grand to ship it over'. fixed costs with importing and complying a car run to over $8K so there is no point in buying a piece of rubbish for $1800. you may as well spend decently on the actual car and get something worth having.

yeah, importing a car can be very worthwhile but don't get sucked into just looking to get a cheap car cheaply. try and get a nice car and be prepared to spend a little extra to get that really nice, special car. Since the fixed costs associated with importing and complying cars are quite a lot it's not really worth importing cheap cars since the bulk of the money you are outlaying is paying for the freight, duties, agents, compliance etc. so you end up spending $10K to get a car that cost you $1K. For a 33 GTST I would probably look here as they are so cheap now. But for a nice GTR, or RX7 etc for sure consider importing.

RX-7s are pretty good value in Japan, vs what they fetch here.

My only other advice is to take the advice of people who have been importing for a while - the biggest dramas I see are usually caused when people who think they've found "a better way of doing things" than others in the industry. If it sounds too good to be true, it usually is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...