Jump to content
SAU Community

R32 Os Giken Gearbox. How To Tell ?

BK
 Share

Recommended Posts

BK Grand Master

BK

Posted
Posted

Just wondering how to tell the OS Giken gearset from the stock nissan gearset ?

I've got an R32 GTR with 550kw @ wheels and destroyed 3rd gear dragging. The car was supposed to have a OS gearset which I know are rated to 800 ps. I've got the box apart now and want to repair it but don't know if it is in fact an OS gearset. I know the ratios are different and if anyone knows the teeth count or something it would be very helpful to try and identify the type of gearset.

As for the car I fixed it with an OS Giken R3C triple plate clutch and a Trust 6 speed straight gear dog box with a new transfer case so I hope the car should be reliable for some more dragging now. Still want to get old box going as a rebuilt OS giken box would be good as a backup with my old transfer case as a bolt in, ready to go spare.

Link to comment
https://www.sau.com.au/forums/topic/222829-r32-os-giken-gearbox-how-to-tell/
Share on other sites
Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
Just wondering how to tell the OS Giken gearset from the stock nissan gearset ?

I've got an R32 GTR with 550kw @ wheels and destroyed 3rd gear dragging. The car was supposed to have a OS gearset which I know are rated to 800 ps. I've got the box apart now and want to repair it but don't know if it is in fact an OS gearset. I know the ratios are different and if anyone knows the teeth count or something it would be very helpful to try and identify the type of gearset.

As for the car I fixed it with an OS Giken R3C triple plate clutch and a Trust 6 speed straight gear dog box with a new transfer case so I hope the car should be reliable for some more dragging now. Still want to get old box going as a rebuilt OS giken box would be good as a backup with my old transfer case as a bolt in, ready to go spare.

the shaft should have OS giken clearly etched into it. Gear teeth are a lot more chunky compared to STD.

infamous_t Veteran

infamous_t

Posted
Posted
the shaft should have OS giken clearly etched into it. Gear teeth are a lot more chunky compared to STD.

Isn't the uprated input shaft only an option? and not necessarily part of every kit?

That said, I don't know why you'd go so far with strenghening, then not get the better input shaft.

STATUS Grand Master

STATUS

Posted
Posted

yeah as dirtgarage said counter shaft has big OS logo on it..... i turned our SR os box inside out within a few meetings.... ppg to the rescue.

Those trust (quaife built) boxes are nice but becareful of reverse and O/H it at the recomended intervals.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...