Jump to content
SAU Community

Recommended Posts

1x large permapine post, 1x guard rail and various little white reflective posts. I've had it for no more than a month :kiss:

LOL sounds like your enjoying it. Still feel all alien to be sliding or getting back into the swing of things now?

Man, I want a slider.... Someone buy my GT-R :D. Would have been good to see some before shots of the damage lol

Edited by Weezy
learn how to drive will ya :)

Nah.

Deej.

LOL sounds like your enjoying it. Still feel all alien to be sliding or getting back into the swing of things now?

Man, I want a slider.... Someone buy my GT-R :) . Would have been good to see some before shots of the damage lol

Surprisingly had no trouble getting back into the groove. After 7 months I was expecting to be super shit but hit up a few corners in the dry and it all came flooding back. Throw in some rain and its linking corners in 3rd :blink:

This is how it looked before I really got into skidding it

post-50221-1275553558_thumb.jpg

Edited by AndrewJZX100

Yep love the GT-Cs on your GTR!!! I nearly bought some for the 35 from JIS, but they had about +10 less offset then I wanted :blink: (and really were more than I wanted to spend for a daily)

post-669-1275560681_thumb.jpg

but got these instead :)

post-669-1275561069_thumb.jpg

18 x 10 +24 on the rear - won't fit under your guards mate - not even close :blink: Perfect for my car though. Shame the fronts are 9 x 24 - not even close to tuff enough for my car. In fact my 9.5 +20s are only just ok for the front, but leave the rears on my car lacking. I am going to put 20mm bolt-on spacers on the 35 for the Kadina show - so they will be 9.5 +0 on the rear :)

18 x 10 +24 on the rear - won't fit under your guards mate - not even close :thumbsup: Perfect for my car though. Shame the fronts are 9 x 24 - not even close to tuff enough for my car. In fact my 9.5 +20s are only just ok for the front, but leave the rears on my car lacking. I am going to put 20mm bolt-on spacers on the 35 for the Kadina show - so they will be 9.5 +0 on the rear :nyaanyaa:

I was looking to get 18 x 9 at the front with a + 18.......and 18 x 10 at the rears + 22

so only a trail fit away now :)

I was looking to get 18 x 9 at the front with a + 18.......and 18 x 10 at the rears + 22

so only a trail fit away now :)

should be fun.

this an 18 x 10 +12 on the 14.

IMG_3180.jpg

IMG_3181-1.jpg

IMG_3182.jpg

Edited by scandyflick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...